EOI: Nismo Carbon Fibre Engine Cover...
Roger,
Just spoke to my prototype design manager... We will improve our prototype and try to copy nismo engine cover entirely, the centre piece will extend slightly further and the line at both sides of the centre piece will end at the front edge of the centre piece too... currently, that centre piece is in plastic, the production piece will be a thin CF layer
We will also look into those other CF parts too
cheers,
richie
cheers,
richie
Just spoke to my prototype design manager... We will improve our prototype and try to copy nismo engine cover entirely, the centre piece will extend slightly further and the line at both sides of the centre piece will end at the front edge of the centre piece too... currently, that centre piece is in plastic, the production piece will be a thin CF layer
We will also look into those other CF parts too
cheers,
richie
cheers,
richie
the parts will be sold through both of us and we are both EVO-R 
We will make the resin heat resistance for sure and will test the final product under extreme heat condition and on our cars before we release it.
cheers,
richie
and we are both EVO-R We will make the resin heat resistance for sure and will test the final product under extreme heat condition and on our cars before we release it.
cheers,
richie
Originally Posted by sponsorsthisway
We are working on the final piece now and we should have some pics for you soon!
cheers,
richie
OK..... another update...
We have changed the previous one a bit... and of course it is not finished yet... still working on it... we will have an even better design tomorrow night!!! We are going to make the middle part slight larger at the far end towards the plenum (exactly the same as the nismo piece) and make the whole engine cover surface better and slightly rounder at both end... then we are done... Here are some updated teasing pictures for you guys...
cheers,
richie
We have changed the previous one a bit... and of course it is not finished yet... still working on it... we will have an even better design tomorrow night!!! We are going to make the middle part slight larger at the far end towards the plenum (exactly the same as the nismo piece) and make the whole engine cover surface better and slightly rounder at both end... then we are done... Here are some updated teasing pictures for you guys...
cheers,
richie
^^ that is HOT...
will they ship to the states ?
i know they same as evo-r but cant get a hold of evo-r and i would buy
the door barrell kit and steering wheel cf covers, and a few other things.
will they ship to the states ?
i know they same as evo-r but cant get a hold of evo-r and i would buy
the door barrell kit and steering wheel cf covers, and a few other things.
Last edited by mndthegap1; Sep 15, 2006 at 05:17 AM.
Originally Posted by mndthegap1
^^ that is HOT...
will they ship to the states ?
i know they same as evo-r but cant get a hold of evo-r and i would buy
the door barrell kit and steering wheel cf covers, and a few other things.
will they ship to the states ?
i know they same as evo-r but cant get a hold of evo-r and i would buy
the door barrell kit and steering wheel cf covers, and a few other things.
cheers,
richie