Rear bumper fold for single exit exhaust
Thread Starter
Registered User
iTrader: (61)
Joined: Nov 2004
Posts: 5,034
Likes: 3
From: Glendale California
Yes ladies and germs, I did this mod also and its soooo worth it. The single exhaust guys definitely need to do this mod, it looks too good. Next on my list are gt spec parts and a rear diff cover with the cooler fins.
Here are the pics...



Here are the pics...



Thread Starter
Registered User
iTrader: (61)
Joined: Nov 2004
Posts: 5,034
Likes: 3
From: Glendale California
Originally Posted by DaveZ06
i still like the dual but you can't beat the classic single 

I agree dual looks better and cleaner, but if you want to save weight and get a sweet exhaust tone, single is the way to go. I miss my greddy evo2's, this thing is uber loud.
Thread Starter
Registered User
iTrader: (61)
Joined: Nov 2004
Posts: 5,034
Likes: 3
From: Glendale California
Originally Posted by bverschage
I like it a lot, you would be able to see my blue SPL diff mounts.
Did you just cut out the center of the stock bumper? If so, what did you use?
Did you just cut out the center of the stock bumper? If so, what did you use?
No i bent it upwards and used 4 self tapping screws.
Trending Topics
Thread Starter
Registered User
iTrader: (61)
Joined: Nov 2004
Posts: 5,034
Likes: 3
From: Glendale California
Most people use the tabs on the bottom of the bumper that is attached to the rear bumper support. Mine unfortunately was seperated from the tabs because my stock muffler broke it off.
I actually drilled through the rear bumper and onto the rear bumper support for this look. I used 4 self tapping screws which take a while to go through the bumper support.
I actually drilled through the rear bumper and onto the rear bumper support for this look. I used 4 self tapping screws which take a while to go through the bumper support.




