Hey guys, just wanted to know what size screws/rivets are used to secure the side skirt from the inside of the car when you open the door.

thanx

 

The rivets that came with the Greddy sides were too small so I had to remove the white grommets from the body...I bought a pkg of Dorman 5/16" /7,93mm part#799-100 at Auto Zone. You would need to loosen up the kick plate when installing the greddy sides & I also jacked the car up on one side & blocked. To remove the kickplate, you first have to remove the plastic pin toward the back & carefully lift upward. If you do break the pop rivets, install with velcro strips to re-stick back down. I would suggest to have a buddy help ya with the side skirt.

 

thanks alot

 

i had this same problem and still have never put mine on

 

i couldnt find the dorman ones...i need to know what to do asap

 

PM sent....sluggoZ to the rescue!!!

 

thanks a lot man