I just installed sparco (seats) torinos (RED) on my 06 Z. Everything was ok except the air bag LED is blinking on the dash and pass air bag LED is always on on the overhead(near the rear view mirror). The passenger seat has an extra wiring for the air bag???...does this require reset? what do i need to do?..please help!!!!

i will post pics as soon as im done!..any info will help!

Cris

 

anyone???

 

I believe you should installed a bypass resistor/fuse (dummy plug) in order to keep the lights from coming on. That's the way you do steering wheels.

 

yes! the resistor should do the trick!

 

Selling stock seats?

 

use cheston's excellent tutorial
https://my350z.com/forum/showpost.ph...9&postcount=12

this is what the thing looks like all put together..

 

thanks, a lot guys!!, thanks leemik!..no im going to try to keep the old seats just in case, sorry.

 

search plz there are dozens of threads about the airbags needing a bipass, there is even a product you can buy and just clips on.

your lucky leemik came to your rescue. j/k

 

im sorry guys, i did not made clear in the beginning. MY 06 Z does not have a seat air bag (b/c its enthusiast). My problem was i have 3 wires for the air bag connectors (instead of 2??). Im guessing that the other wire or lead is for the weight sensor...3 total in one connector.

will the 2 ohm resistor dummy still applies in this case?? if it does where will i tap it into?...

any info is helpful