Can anyone tell me what bulbs these are? I wanted to swap them out for the leds on http://www.superbrightleds.com

Or better yet... which one of these would fit?

1)
3022 White LED Festoon Base Bulb
31x10mm 12 VDC
Available with 2 or 4 LEDS aiming in the same direction
$ 2.45

2)
1142 White LED Festoon bulb
42x11mm 12 VDC Festoon Base Bulb with 6 Super White LEDS
$ 3.49

3)
Neither


Thanks in advance.

 

Don't remember off hand the sizes, but it does tell you in the manual, check the index under "Bulb" =)

 

can you "just" swap out the light bulb with the led's? or u need resistors??

if were able to swap out the bulb, could you pls let us know which led? thanks!

I would love to have some led's for the map light!

 

The bulb number is the t-6 I swaped mine out for the PIAA xtream white, I actually bought them at sound advice. they made a world of a diffrence. good luck!

 

Yes, you need resistors to prevent overpowering the LEDs.

I'm currently selling my Luxeon dome lights. They've been in my car since day 1, and still lights up nicely.

I'm going to replace them with this year's production Luxeons because of improved color rendering.

They look a tad yellow, but the light emitted is very neutral and easy on the eyes at night. I just want a whiter look.

Here's a picture of what this coloration looks like.

 

I believe the ones on superbright LEDs have build in resistors as they are made for a specific application and current.

loose LEDs that they also sell, or luxeon, do require resistors as well as a bit extra work, they arent made to plug in, if your not familiar Id go with the regular premade set, or the ones from DJ since they are already setup.

 

Wah? Can I be MY350Z Inventor?

Or MY350Z DJ?

:-D

-Once I find the materials, I'll figure something out. Now I got 4 tests to study for next week. Anyone enjoy Thermodynamics?

 

absolutely not, right now Im prefering aromatic reactions at 11 and transcription at 12, followed by Im not sure what at 1.

I did my thermodynamics 2 years ago, Ill never go back, NEVARR!!!!!

 

do you know is there a superbright LED that can just fit into the map light? any part number would be highly appreciated.

 

not "just an led" they always just have 2 contacts, no actual peice.

but I believe superbrightleds makes them with a plug peice already assembled to plug right in, and I guess piaa does as well.

 

Heh... we all took a quiz today, and I didn't know anyone who could finish the problem.

Anyhow... can i still be inventor? :-D AHAH... or DJ... it would be fine.

*Currently talking to someone about getting plastic bulb pieces.
*I think I found a good place for resistors... maybe zener diodes as well!