HID Conversion Kit installtion questions with pics:
#2
The harness snakes around the headlight and plugs into the big light gray connector right underneath each light. It is the only piece of wiring on/around the headlights. What blub are you plugging into it? Are you trying to splice into factory wiring? I assume it isn't just a bulb replacement issue.
#3
The headlight harness is ON the headlight. If you need to plug a bulb into it, the plug should be right there... on the headlight.... where the bulb goes... I think that's what you're asking??
#4
Originally Posted by usmanasif
The harness snakes around the headlight and plugs into the big light gray connector right underneath each light. It is the only piece of wiring on/around the headlights. What blub are you plugging into it? Are you trying to splice into factory wiring? I assume it isn't just a bulb replacement issue.
#6
Originally Posted by usmanasif
So you're trying to replace the headlight bulb? Just remove the old one from behind the headlight and plug the new one in.
#7
Ok I pluged in my Bulb already, and I am wondering where to plug these two butt connectors into? I am assuming they go into this black piece where the OEM non HID Bulb goes into?
On the other side of those butt connectors is this:
The guide says to plug this into the OEM factory headlight harness, I don't know where that is.. that was my original question.
Since I have pictures now anyway I had a another question: Out of my relay harness there is this:
Where do I connect this as well?
On the other side of those butt connectors is this:
The guide says to plug this into the OEM factory headlight harness, I don't know where that is.. that was my original question.
Since I have pictures now anyway I had a another question: Out of my relay harness there is this:
Where do I connect this as well?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
350Z Project X
Suspension
9
10-10-2015 09:23 AM