Pics of Painted Headlights
#1
Registered User
Thread Starter
Join Date: Mar 2008
Location: Jacksonville, Fl
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Pics of Painted Headlights
I took my headlight overlays off and decided to bake them and paint the inside, take a look at the pics and tell me what you think, thanks
#7
Registered User
Thread Starter
Join Date: Mar 2008
Location: Jacksonville, Fl
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the positive feedback, in my opinion it looks so much cleaner than the overlays that i had on and for those who want to do this but afraid of messing it up...its pretty simple and straight forward
Trending Topics
#8
Registered User
iTrader: (97)
Join Date: Jun 2003
Location: Los Angeles County
Posts: 2,820
Likes: 0
Received 0 Likes
on
0 Posts
https://my350z.com/forum/body-interi...k-housing.html
~Robert
#11
Registered User
iTrader: (34)
I think you painted too much of the light.... you weren't suppose to paint the chrome for the blinker light or the chrome under the running light/ reflector strip... It should have been taped off, unless thats what you were going for than ignore me...
Last edited by stealthz; 11-03-2008 at 12:31 PM.
#13
Registered User
iTrader: (34)
-so paint them the way you want but if you want them to be just as functional as they were stock... then don't paint those areas
#15
Registered User
Join Date: Oct 2008
Location: Sacramento, CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
#18
Registered User
Thread Starter
Join Date: Mar 2008
Location: Jacksonville, Fl
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
^i just didnt, i want 06 but they are too expensive plus i have 03 base non-hid so i would have to buy the ballasts and everything else that i need for the conversion...1200 for headlights is too expensive but i will do it eventually. This was just a temporary thing until i can fork at the money of 06's. By the way matix101vz...how does the borla exhaust sound with the topspeed testpipes because that is what i am thinking of doing? thanks
#20
Registered User
Thread Starter
Join Date: Mar 2008
Location: Jacksonville, Fl
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
the light output is the same except for the turn signals but...who gives a f*ck about the turn signal light output. I say do it, just make sure you seal the headlight back up with some silicone