Is it possible to switch out the stock front reflectors without taking off the bumper?

 

Yes, search for threads started by me, you'll find a write up.

 

https://my350z.com/forum/exterior-in...-write-up.html

here you go, you'll notice theres a real ***** in my thread. You'll probably see him in here later telling you to use the search function, lol.

 

Possible but kinda a pain, I can remove the bumper to quik to avoid it.

 

ahh, thanks were they easy to reach once u remove the plastic guard?
nvm, found the answer to my question in the thread u gave me thnks a lot!

 

i tried doing it w/o removing the bumper and could not get through the windshield washer res. Had to remove the bumper. I'd like to know the method and tools u used in doing so.

 

My hands and brain. I'm not trying to be a smart *** but the res was barely in the way. Get your hands in there and do work son! Tools are listed in my write up.

CLIFF NOTES

Lift car, drop skid plate, pull the side plastic splash gaurds back to get your hand in there with a screw driver, remove then install. Put the skid plate back on and drop car. (You will be on your back and semi-under the car for this so use safety jacks!)

 

i accomplished it on my 07. i just took out the inside wheel wells and used a small phillips screwdriver but the passenger side was a pain because of the washer fluid but after awhile i was able to get behind it without having to take anything off. i did use his thread though and it helped me