adamtaylorpcb

iTrader: (7)

im painting my kick panels soon. i glassed in some pods and bondo'd over that. sanded with 80 then 150 grit till it was smooth. any other prep i need?

i have filler primer, paint and clear already

Caravanshaka

Filler primer is used for smoothing the surface even more, so only use that if you don't think they are smooth enough yet.

If you don't want to go cheap on it, you'll want to epoxy primer (which will seal underneath), then use your filler primer since the epoxy won't be sandable. Then base and clear coat.

sintaxeror

iTrader: (3)

You need to sand the fiberglass/bondo smooth to 400 grit, then use filler primer. There is no need to seal them with epoxy primer, as fiberglass does not oxidize.

Caravanshaka

While that is true of fiberglass, sealer will help assure that you do not have any chemical reactions between the paint and anything underneath the epoxy. A good habit to get in to if you ever go into restoring (I have a '66 mustang GT)