Will 2003 Body Parts Work On A 2007?
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2009
Location: Illinois
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Will 2003 Body Parts Work On A 2007?
Hey All,
Just bought my first 350z. It's a 2007 Roadster, and needs some front body parts replaced. My question is, will parts off a 2003 coupe work? I tracked some down, and was wondering if they are they same.
Thanks in advance
Just bought my first 350z. It's a 2007 Roadster, and needs some front body parts replaced. My question is, will parts off a 2003 coupe work? I tracked some down, and was wondering if they are they same.
Thanks in advance
#4
Registered User
Join Date: Nov 2008
Location: Texas
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered User
iTrader: (6)
Go here and look up the parts you need. Look at the same part for the different years and see if the part numbers are the same.
http://www.courtesyparts.com/350z-pa...c-714_715.html
#6
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2009
Location: Illinois
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Ok. actually the parts I need are bumper,hood, fenders, radiator, etc...basically whole front clip. Guess I could see if I could get one without bumper if other parts will work?
Trending Topics
#11
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
hood - I don't know anyone who has ever tried an 03 hood on an 07 car - most of us just assume they don't fit because we assume the "hump" in the 07-08 cars are there to clear the new intake manifold. I don't think anyone has ever tried the swap though to know for sure
bumpers are slightly different at the botto, but interchange. Fenders interchange. Rad supports interchange but all brackets on the passenger side are required, or you'll need to do some trimming for proper fitment. Radiators are different...they interchange, but the in/out are in different locations, so you need to stick with a radiator that matches the year car you have, or you'll have to make your own hoses
bumpers are slightly different at the botto, but interchange. Fenders interchange. Rad supports interchange but all brackets on the passenger side are required, or you'll need to do some trimming for proper fitment. Radiators are different...they interchange, but the in/out are in different locations, so you need to stick with a radiator that matches the year car you have, or you'll have to make your own hoses
Thread
Thread Starter
Forum
Replies
Last Post
FromGtoZ
Intake Exhaust
2
09-20-2015 03:41 PM