Modified 350z L.E.D. tail lights
04-22-2010 | 05:30 PM
#62
just fill the spot with LED for normal break light
Last edited by M6SXTZ; 04-22-2010 at 05:40 PM.
04-22-2010 | 07:41 PM
#64
Thread Starter
Registered User
Joined: Apr 2010
Posts: 121
Likes: 0
From: Arizona
Thank you...I will post some more pics shortly. I will have to take some pics in the day light. It is still a work in progress and as of right now the only pics I have with the front bumper installed are from the test fiting I did. The bumper sits about 2"-3" off the ground at stock ride hieght with 18" rims.Which makes it hard to get over speed bumps across dips or into most driveways or parking lots with even a slight incline. I have a set of 20" rims that I am going to swap the 18's for. I am hoping that by doing this it will give me the clearance I need to put the front bumper back on. The rear bumper and side skirts are Tom motorsports...The front bumper is Ibherdesign Havoc (Not the wide body version)... The front fenders are D1 drift... VIS Carbon fiber fuzion hood... Jp Vizage Type A spoiler... 20"x10" Lucid rims (soon to be put on)...
04-22-2010 | 08:29 PM
#66
Thread Starter
Registered User
Joined: Apr 2010
Posts: 121
Likes: 0
From: Arizona
. Just had to wire new ends on so they would be plug and play. Also the bolt covers from my 06 will not work on them...I will have to fabricate some new covers.
04-23-2010 | 08:39 AM
#67
Yeah I think its just the way the video looks.....The spoiler I LOVE and would never get rid of...Its an original JP Vizage type A... I like how it hangs off the back, kind of like a drag wing... Plus I feel it flows with the rest of the car.. Here are a couple of pics maybe you can see the vents better. I have some other pics of the vents on my other pc will load some of them later tonight.
Two computers and a slate.... Just gangsta!
Last edited by J. Dub; 04-23-2010 at 11:49 AM.
04-23-2010 | 10:29 AM
#68
Thank you...I will post some more pics shortly. I will have to take some pics in the day light. It is still a work in progress and as of right now the only pics I have with the front bumper installed are from the test fiting I did. The bumper sits about 2"-3" off the ground at stock ride hieght with 18" rims.Which makes it hard to get over speed bumps across dips or into most driveways or parking lots with even a slight incline. I have a set of 20" rims that I am going to swap the 18's for. I am hoping that by doing this it will give me the clearance I need to put the front bumper back on. The rear bumper and side skirts are Tom motorsports...The front bumper is Ibherdesign Havoc (Not the wide body version)... The front fenders are D1 drift... VIS Carbon fiber fuzion hood... Jp Vizage Type A spoiler... 20"x10" Lucid rims (soon to be put on)...
04-28-2010 | 08:48 AM
#70
Thread Starter
Registered User
Joined: Apr 2010
Posts: 121
Likes: 0
From: Arizona
Yeah bro.... I hear ya....I never really understood why anyone would want those tail lights....I mean to each his own ....but why the massive protruding lump? Who really thinks that looks good... The Z has such a nice smooth/clean body why change it so drastically. Thats why I never liked the depo Big *** Z tail lights, they had to change the lens cover tho fit the Z under there.
04-28-2010 | 09:32 AM
#71
Yeah bro.... I hear ya....I never really understood why anyone would want those tail lights....I mean to each his own ....but why the massive protruding lump? Who really thinks that looks good... The Z has such a nice smooth/clean body why change it so drastically. Thats why I never liked the depo Big *** Z tail lights, they had to change the lens cover tho fit the Z under there.
You sir deserve :
04-29-2010 | 08:23 PM
#73
Thread Starter
Registered User
Joined: Apr 2010
Posts: 121
Likes: 0
From: Arizona
Just an update for anyone that is interested....I WILL be making more tail lights. Another set will be in production here shortly...This is a busy month so bear with me but anyone who is interested P.M. me and I will keep you all informed on when to expect some more to be done and on how much $$$ and what options will be included.They will have wide beam ultra bright white L.E.D. reverse lights and turn signals built in to them.Let me know if you have any questions or suggestions and I will try to get back to all of you.
04-29-2010 | 08:24 PM
#74
Thread Starter
Registered User
Joined: Apr 2010
Posts: 121
Likes: 0
From: Arizona
Just an update for anyone that is interested....I WILL be making more tail lights. Another set will be in production here shortly...This is a busy month so bear with me but anyone who is interested P.M. me and I will keep you all informed on when to expect some more to be done and on how much $$$ and what options will be included.They will have wide beam ultra bright white L.E.D. reverse lights and turn signals built in to them.Let me know if you have any questions or suggestions and I will try to get back to all of you.
04-30-2010 | 05:46 AM
#75
Just an update for anyone that is interested....I WILL be making more tail lights. Another set will be in production here shortly...This is a busy month so bear with me but anyone who is interested P.M. me and I will keep you all informed on when to expect some more to be done and on how much $$$ and what options will be included.They will have wide beam ultra bright white L.E.D. reverse lights and turn signals built in to them.Let me know if you have any questions or suggestions and I will try to get back to all of you.
05-11-2010 | 10:45 AM
#76
Thread Starter
Registered User
Joined: Apr 2010
Posts: 121
Likes: 0
From: Arizona
UPDATE:
Tail lights and wide beam L.E.D.'s for the revers lights just came in yesterday. I am planing on starting on the 2nd set by this weekend. Should have some pics and videos up soon after.
Tail lights and wide beam L.E.D.'s for the revers lights just came in yesterday. I am planing on starting on the 2nd set by this weekend. Should have some pics and videos up soon after.
05-11-2010 | 11:08 AM
#77
05-12-2010 | 08:34 AM
#79
