New widebody Front venders! Requested by My350z!
#1
New widebody Front venders! Requested by My350z!
Our new Wide body front fenders are just about done for the 350z..
We need 10 People to commit to the project to get the mold made for these new fenders
http://www.cianciusa.com/nissan-350z...nders-110.html
- Vent will come cut out
- Intro Price of $399 + s/h or Free local pickup from San Diego CA
- Apx 10mm Wider
- Our paypal is "sales@cianciperformance.com"
Actual Product:
We need 10 People to commit to the project to get the mold made for these new fenders
http://www.cianciusa.com/nissan-350z...nders-110.html
- Vent will come cut out
- Intro Price of $399 + s/h or Free local pickup from San Diego CA
- Apx 10mm Wider
- Our paypal is "sales@cianciperformance.com"
Actual Product:
Last edited by C7 Carbon; 08-24-2011 at 05:58 PM.
#5
im confused.. where does the "wide" part come in?
If these use the same fenderliner as it appears they do, and is flush w the normal front end.. how are they wider at all?
If these use the same fenderliner as it appears they do, and is flush w the normal front end.. how are they wider at all?
#7
QUOTE=GeauxLadyZ;9329727]But these will still mate up to a non-widebody front bumper/side skirts?
Made of FRP?[/QUOTE]
Correct, they flow back into the OEM lines in the front bumper and side skirts. The middle portion of the fender is where the arch comes out 10mm. The OEM fender liners will not attach to the center section of the fender since it is wider. A bracket or extension will need to be attached.
Made of FRP?[/QUOTE]
Correct, they flow back into the OEM lines in the front bumper and side skirts. The middle portion of the fender is where the arch comes out 10mm. The OEM fender liners will not attach to the center section of the fender since it is wider. A bracket or extension will need to be attached.
Trending Topics
#8
If u guys are still looking for more people to prototype. I am local and may possibly be able to lend a hand. How would I be able to get a hold of u, besides email? Don't really check mine.
#10
OP said the top flare is what sticks out an approx. 10mm's.
So people are paying for a somewhat riced out/vented pulled fender?
In for more pics to help make up my mind wether or not I like the product.
#13
I like the concept better than the actual product. In the concept, the piece thats cut looks a bit concave. It looks like its going towards the "inside."
On the actual product, it seems like its flat. Sometimes it seems like its popping out at the end towards the bumper side -- if that makes sense?
Also, if this was a wide fender, I don't think it would line up with the front bumper....
On the actual product, it seems like its flat. Sometimes it seems like its popping out at the end towards the bumper side -- if that makes sense?
Also, if this was a wide fender, I don't think it would line up with the front bumper....
#14
There are quite a few different wide fender options for other cars (ie RX7, 240sx, etc) that are "wider" but still meet up with stock bumpers...
Just cause your going wider doesnt mean it has to be so aggressive you HAVE to replace the bumpers and stuff....just sayin...
My question is what are is the vendor planning on doing for the rear wheels, are you planning on designing overfenders to match these? (+10,+15mm rears)?
Just cause your going wider doesnt mean it has to be so aggressive you HAVE to replace the bumpers and stuff....just sayin...
My question is what are is the vendor planning on doing for the rear wheels, are you planning on designing overfenders to match these? (+10,+15mm rears)?
#19
Thank you
Also for everyone looking for more pictures. We added more pictures of the fenders in there prototype stage onto our website:
http://www.cianciusa.com/nissan-350z...nders-110.html
Also for everyone looking for more pictures. We added more pictures of the fenders in there prototype stage onto our website:
http://www.cianciusa.com/nissan-350z...nders-110.html