Fitment Issues with AIT Front Lip
#1
Registered User
Thread Starter
Fitment Issues with AIT Front Lip
I just received the V1 lip, and I notice a problem. I wanted to make sure the lip fits my bumper but it does not fit perfectly. Is this the right or wrong lip for my 08 z?
#3
Registered User
Thread Starter
This is where I got the lip. It says it fits 03-08, which i find odd. since the bumpers vary from 03-05 and 06+
http://www.bodykitsuperstore.com/nis...ip-p-6037.html
http://www.bodykitsuperstore.com/nis...ip-p-6037.html
#6
Registered User
Thread Starter
I just contacted the guy and he tells me that by heating the lip (leaving the lip on the sun for 45 mins) will make the lip flexible enought to fit on my 08 bumper. Now I have search threads and I do not see one DIY about heating the lip inorder to fit the lip. I think I shall return it.
#7
Registered User
Thread Starter
Trending Topics
#8
Premier Member
iTrader: (57)
I just contacted the guy and he tells me that by heating the lip (leaving the lip on the sun for 45 mins) will make the lip flexible enought to fit on my 08 bumper. Now I have search threads and I do not see one DIY about heating the lip inorder to fit the lip. I think I shall return it.
I say just return it
#10
Registered User
Thread Starter
Hot damm, this guy wont take no for an answer. I keeps talking that the lip does fit. Its just that your have to heat it up to soften the flexibility inorder for the lip to fit. To me it sounds iffy.
I do not see any threads complaining about this lip company claiming that it fits all Z bumpers.
I do not see any threads complaining about this lip company claiming that it fits all Z bumpers.
#11
Registered User
Thread Starter
So, if I were to get either Mines or Veilside (real) http://www.versustradingco.com/#/ite...frp_front_lip/
would they both fit perfectly without doing the heating process?
would they both fit perfectly without doing the heating process?
#13
^^Exactly, I thougth there was an indent on the 06+, shouldnt even fit.
Yes, the mines will fit very well, and the veilside is authentic so that too. Check out the mines v1 thread
Yes, the mines will fit very well, and the veilside is authentic so that too. Check out the mines v1 thread
#14
Registered User
Thread Starter
The guy keeps telling me that the all bumpers on the lower section are the same size and it should fit. The moment he said that I wanted to return this product right away. I ended up with some scratches with this darn lip. Learned my lesson.
#16
Banned
iTrader: (2)
Return the lip,it is not made for your bumper.
It looks like a 03-05 fit(maybe).
A proper fitting lip should just pop into place...no gaps.
Another case of paying for what you get.
No amount of heat is gonna change anything.
How did you pay for the lip?
Credit card/PayPal...contact them to dispute.
Anything I order online its with AMEX.They will
handle if there is a problem with the goods.
It looks like a 03-05 fit(maybe).
A proper fitting lip should just pop into place...no gaps.
Another case of paying for what you get.
No amount of heat is gonna change anything.
How did you pay for the lip?
Credit card/PayPal...contact them to dispute.
Anything I order online its with AMEX.They will
handle if there is a problem with the goods.
Last edited by JCITY; 06-06-2012 at 04:41 PM.
#17
Premier Member
iTrader: (57)
The lip is a little short to fit in in the grille area. The upper portion of the lip where it stays on the grille looks like a upside-down trapazoid shape, which is off and wierd looking.
The guy keeps telling me that the all bumpers on the lower section are the same size and it should fit. The moment he said that I wanted to return this product right away. I ended up with some scratches with this darn lip. Learned my lesson.
The guy keeps telling me that the all bumpers on the lower section are the same size and it should fit. The moment he said that I wanted to return this product right away. I ended up with some scratches with this darn lip. Learned my lesson.
If he doesn't let you return it I would try to contact your credit card company or worst case just sell it on the forum and someone will want it I'm sure
#20
Registered User
iTrader: (1)
Join Date: Dec 2006
Location: florida
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
AIT Racing @#%R$@#$ I found this out installing the INGS LX sides, really F#$k up fitment wise. I only paid 50.00 for the pair and did all the work myself to make them fit. Send it to me I need another project.
too short both ends
cut out this section so the thing would butt up to rocker and rebuilt
need better pics, some day
too short both ends
cut out this section so the thing would butt up to rocker and rebuilt
need better pics, some day