Seat Airbag mod. No Light
01-20-2004, 06:16 PM
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: florida
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Seat Airbag mod. No Light
Well i found a ghetto fabulious deal on a set of leather electric seats that i put in my track model ($300).
My track seats have bags in it but hte leather did not. To get rid of the airbag light, I used a 2ohm resistor or two 1 ohm in series is what i actually used to mimic the airbag.
The airbag was 2.5 ohms. So you might get away with a 3 ohm resistor. I wired it into the factory connector that is now left unplugged.
If anyone is intrested in my track seats with airbags, they are for sale. Im open to offers.
My track seats have bags in it but hte leather did not. To get rid of the airbag light, I used a 2ohm resistor or two 1 ohm in series is what i actually used to mimic the airbag.
The airbag was 2.5 ohms. So you might get away with a 3 ohm resistor. I wired it into the factory connector that is now left unplugged.
If anyone is intrested in my track seats with airbags, they are for sale. Im open to offers.
04-10-2007, 04:15 PM
#4
Registered User
iTrader: (10)
Join Date: Mar 2007
Location: West Coast
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Exhaust Depot
Well i found a ghetto fabulious deal on a set of leather electric seats that i put in my track model ($300).
My track seats have bags in it but hte leather did not. To get rid of the airbag light, I used a 2ohm resistor or two 1 ohm in series is what i actually used to mimic the airbag.
The airbag was 2.5 ohms. So you might get away with a 3 ohm resistor. I wired it into the factory connector that is now left unplugged.
If anyone is intrested in my track seats with airbags, they are for sale. Im open to offers.
My track seats have bags in it but hte leather did not. To get rid of the airbag light, I used a 2ohm resistor or two 1 ohm in series is what i actually used to mimic the airbag.
The airbag was 2.5 ohms. So you might get away with a 3 ohm resistor. I wired it into the factory connector that is now left unplugged.
If anyone is intrested in my track seats with airbags, they are for sale. Im open to offers.
04-11-2007, 10:43 AM
#6
Registered User
iTrader: (8)
Join Date: Dec 2006
Location: ATL
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust Depot....is there any way you can snap a couple pics of the finished wired product? I understand all of the process, it just helps me to "see" the finished product. I'm installing a Corbeau A4 in a week...
Thread
Thread Starter
Forum
Replies
Last Post
