not sure where you got your info from, but according to this site:
http://www.zeroto60times.com/


2008 Nissan 350Z Enthusiast 0-60 mph 5.2 Quarter mile 13.5



Honda S2000 Sports Car 0 to 60 mph and Quarter Mile Times

2000 Honda S2000 0-60 mph 5.7 Quarter mile 14.0

2001 Mugen Honda S2000 0-60 mph 5.3

2003 Honda S2000 0-60 mph 6.2 Quarter mile 14.7

2004 Honda S2000 0-60 mph 5.7 Quarter mile 14.0

2006 Honda S2000 0-60 mph 5.4 Quarter mile 13.8

2008 Honda S2000 CR 0-60 mph 5.6 Quarter mile 14.2

2009 Honda S2000 Edition 100 0-60 mph 6.1


I'm not saying the s2k is faster. All i'm saying is that the s2k can keep with the 350Z and our cars will not "rip them", stock for stock.

also, the aftermarket support for mods for both cars are extremely high, but once again, goes back to my point of how much $ you're willing to spend.

 

Someone should put this on an S2K forum to start a war, like with the Mazda guys...

 

I got that time from the s2k forums, i didnt have enough time to really look for the time, stock for stock though, we would get them, but as soon as you start modding the s2000, its night and day

 

Not worth it, s2k guys dont care like that

 

Just go for it. Its YOUR car.

 

stock for stock, we wouldn't get them by much. the Z is a heavy car - weight-to-power ratio.

you should really do your research, esp. before you decide to call someone out. do you watch espn? "C'MON MAN!"

 

Don't know why there is so much hate, s2k seats are my fav seats. Anyways, this might help, I was going to swap them into my prelude when I had one. You might be able to swap the seat pans. Worse comes to worse, I've seen people custom fab seat rails.

http://www.preludepower.com/forums/s...d.php?t=351345

http://www.preludepower.com/forums/s...5&postcount=14

 

Thanks bro. the seats are awesome and way cheaper then any other leather aftermarket seats.

 

Nobody was calling out, just saying s2ks stock for stock arent hanging like that, especially with those times being done with pro drivers

Ive actually raced these cars, they are great cars stock, mod it a little bit and they are beasts, but stock for stock on a track, the Z will win all day with equal drivers by a decent amount.

 

I clicked on a thread about putting seats from a S2000 in a Z and it comes up with which one is faster. So many people on this forum are bad at staying on track.

 

Well i belive the question was already answered now we are just shooting the shiit

 

once again, yes the Z will win against an s2k, stock for stock. but going as far as "ripping them" and "decent amount"? absolutely not.

Nissan 350Z Enthusiast 0-60 mph 5.2 Quarter mile 13.5 (VQ35HR)


Honda S2000 0-60 mph 5.4 Quarter mile 13.8 (F22 -AP2)

.2 and .3 does not justify it as "ripping them" apart by a "decent amount".

 

and yet here you are, not answering the OP's question....

 

Only way'd i'd give up Z33 seats would be if they are from a base model and cloth. S2k seats are nice and hold well and can be found on ebay... They are a popular swap for sc300's !

 

Do you want a seat that can really hold u down and very purposeful, with good clearance for helmet and light (11 pds vs 45pds )...? check this...but this is not my DD

 

Hey all! I have these seat on my '05 350Z and am wondering if anyone know where replacement skins can be purchase or has anyone had luck finding someone to replace some of the cracked leather? I really like these seats but I bought the Z with the idea that i could get the drivers seat recovered...but so far no luck!

 

I've done a seat swap in my previous car, an RSX and I put in Mazda 3 seats because they were more comfortable for me and RSX seats are good looking, but terrible for your spine. What I did was take out the stock seas, take off the OEM RSX mounting brackets, and then bolt them onto the Mazda 3 seats. Luckily the railings were equal distance apart on both cars.

now for the S2k and the 350z... I don't know if the railings are the same width apart, but maybe this method can work for you. this way you can just keep the railings on both seats and save yourself some trouble by not fabricating any mounts yourself.

 

it is possible and worth it to switch 370 seats into a 350 , I find 350 seats really uncomfortable?

 

Most comfortable seats I ever purchased were cheap vinyl seats off ebay. They were $300 shipped reclinable(even cheaper now). I bolted them through the floor with 3/4" square stock holding the seats up(maybe 1/2") so you could just bolt them straight through the floor with the square stock as a spacer to set the height and tilt

 

Sounds dangerous.