8 pin headlight connector?
#21
#22
New Member
iTrader: (2)
Your aftermarket 8 pin connector is using different colors that don't match the OEM headlight harness colors.
I can't tell what you have connected to pins 5-8 based on your picture.
Are you referring to the red and black connector coming out of the headlamp housing? That looks like the high beam solenoid trigger for the HID projector, but I'm not sure.
I can't tell what you have connected to pins 5-8 based on your picture.
Are you referring to the red and black connector coming out of the headlamp housing? That looks like the high beam solenoid trigger for the HID projector, but I'm not sure.
#23
Hi so i tried this set up on my 03 and i found out that my turn signal is purple/white on the chasis not red or black. I used a test light and it flashes on purple, ive tried every combination of cables and cant get any other lights to work only the turn signal, am i doing something wrong?
#24
Your aftermarket 8 pin connector is using different colors that don't match the OEM headlight harness colors.
I can't tell what you have connected to pins 5-8 based on your picture.
Are you referring to the red and black connector coming out of the headlamp housing? That looks like the high beam solenoid trigger for the HID projector, but I'm not sure.
I can't tell what you have connected to pins 5-8 based on your picture.
Are you referring to the red and black connector coming out of the headlamp housing? That looks like the high beam solenoid trigger for the HID projector, but I'm not sure.
#26
#27
New Member
iTrader: (2)
It sounds like you have the connections for the pins reversed. Looking at the harness from the body (not looking at the harness leading to the headlight), the pinouts should be connected like this.
Pin #, color, description
1: Black, Turn signal; Parking light; Side Marker, Ground -
2: Green.White, Turn signal, 12+
3: Red/Yellow, Headlamp High, 12+
4: Black, Headlamp High, Ground -
5: Red/Blue, Side Marker, 12+
6: Red/Blue, Parking Light, 12+
7: Red/Black, HID Low, 12+
8: Black, HID Low, Ground -
Your colors will likely be a little different. Currently, it appears you have your high beam connected to 7 and 8 instead of 3 and 4. You might need to flip everything.
Pin #, color, description
1: Black, Turn signal; Parking light; Side Marker, Ground -
2: Green.White, Turn signal, 12+
3: Red/Yellow, Headlamp High, 12+
4: Black, Headlamp High, Ground -
5: Red/Blue, Side Marker, 12+
6: Red/Blue, Parking Light, 12+
7: Red/Black, HID Low, 12+
8: Black, HID Low, Ground -
Your colors will likely be a little different. Currently, it appears you have your high beam connected to 7 and 8 instead of 3 and 4. You might need to flip everything.
#28
It sounds like you have the connections for the pins reversed. Looking at the harness from the body (not looking at the harness leading to the headlight), the pinouts should be connected like this.
Pin #, color, description
1: Black, Turn signal; Parking light; Side Marker, Ground -
2: Green.White, Turn signal, 12+
3: Red/Yellow, Headlamp High, 12+
4: Black, Headlamp High, Ground -
5: Red/Blue, Side Marker, 12+
6: Red/Blue, Parking Light, 12+
7: Red/Black, HID Low, 12+
8: Black, HID Low, Ground -
Your colors will likely be a little different. Currently, it appears you have your high beam connected to 7 and 8 instead of 3 and 4. You might need to flip everything.
Pin #, color, description
1: Black, Turn signal; Parking light; Side Marker, Ground -
2: Green.White, Turn signal, 12+
3: Red/Yellow, Headlamp High, 12+
4: Black, Headlamp High, Ground -
5: Red/Blue, Side Marker, 12+
6: Red/Blue, Parking Light, 12+
7: Red/Black, HID Low, 12+
8: Black, HID Low, Ground -
Your colors will likely be a little different. Currently, it appears you have your high beam connected to 7 and 8 instead of 3 and 4. You might need to flip everything.
#29
It sounds like you have the connections for the pins reversed. Looking at the harness from the body (not looking at the harness leading to the headlight), the pinouts should be connected like this.
Pin #, color, description
1: Black, Turn signal; Parking light; Side Marker, Ground -
2: Green.White, Turn signal, 12+
3: Red/Yellow, Headlamp High, 12+
4: Black, Headlamp High, Ground -
5: Red/Blue, Side Marker, 12+
6: Red/Blue, Parking Light, 12+
7: Red/Black, HID Low, 12+
8: Black, HID Low, Ground -
Your colors will likely be a little different. Currently, it appears you have your high beam connected to 7 and 8 instead of 3 and 4. You might need to flip everything.
Pin #, color, description
1: Black, Turn signal; Parking light; Side Marker, Ground -
2: Green.White, Turn signal, 12+
3: Red/Yellow, Headlamp High, 12+
4: Black, Headlamp High, Ground -
5: Red/Blue, Side Marker, 12+
6: Red/Blue, Parking Light, 12+
7: Red/Black, HID Low, 12+
8: Black, HID Low, Ground -
Your colors will likely be a little different. Currently, it appears you have your high beam connected to 7 and 8 instead of 3 and 4. You might need to flip everything.
pin # ,aftermarket color , oem color , location
1.blue,black turn signal side marker
2.yellow,light green, high beam
3.black,green/black, turn signal side marker
4.red,black,high beam
5.blue,black,hid ballast
6.yellow,red, hid ballast
7.black,red,led strip day time running
8.red,black,led strip day time running
Last edited by Autumnj01; 01-29-2024 at 10:06 AM.
Thread
Thread Starter
Forum
Replies
Last Post