I put some smoked film over my brake lights... It is a thick film similar to that of a clear bra but not as thick...

This film is available for the front headlights / front side markers / rear brake lights / rear turn signals in Clear / Yellow / Blue or Smoked...

What do you think

 

 

looks bad a$$ man, great job!

 

they are one piece headlight and tail light over lays that will be availble from us shortly...

 

prices? and when will they be available?

 

maybe its just the pic, but on the drivers side brake light, you can see a line of red at the top of the light. It looks great though!

 

This is the first kit we installed... The new kits that we are making from these are going to be a little larger so they cover the whole rear light completely...

Front fitment is perfect...

Install can be done wet or dry... The material is so easy to work with if you get a bubble you peal it off and then re-apply...

 

here is the rear light...

remember this was the prototype kit and we have now got it so it covers the whole light...

 

here is a pic of the material....

the yellow looks SICK on headlights...

 

Is that the same stuff Bat uses?

 

no... it is a thick rubbery 3M material... it is 17mil thick for the Blue / Yellow / Smoke and clear is 20mil... It is thick enough and durable enough to act as a protectant for your front headlights against rock chips and track rubber just like a clear bra... The material has a warranty of 3-5 years against cracking / pealing / bubbling...

Pricing will be as follows...

Front head-light kit = 69.95

Rear Tail-light kit = 59.95

Rear Turn Signal and Front Bumper Reflectors = 29.95
(Front and rear included in this price)

Rear Brake Light & Front and Rear turn signal / Reflector combo = 79.95

all above prices shipped with squeegie and instructions...

Headlights available in Blue / Smoke / Yellow / Clear

Brakelights available in the 3 colors as special order but we will regularly stock smoked.

Fitment of the kit has now been perfected unlike the rear alignment on my kit where we cut the material too small...

We are going to begin taking orders this week and shipping next week...

Material is easy to apply... If you apply and get a bubble you can peal it off and re-apply... Material is flexable to the point where you can try to jam a pen through it and it will take shape of the pen and work its way back to a flat piece of film...

 

Is that the static cling on vinyl? If it's the same material I'm thinking of, they come off quite easily.

Bat™

 

it is like a vinyl... it is no static cling at all... it has an adheasive backing... like a clear bra

 

cool.

Bat™

 

Sweet! How dark does the front headlamp smoked overlays look?

 

i'm definetly interested in the yellow. Do you have any pics of it on the headlight? also would the light output be considered non street legal with the yellow overlays?

 

Interested in yellow... wtb!

 

do u have pics with the yellow front overlays?

 

How's the light output with those on? Hit the brakes and take a picture, also take another at night with the lights on.

 

Ya, how dark is the smoke. Hard to tell from the taillight pics. I guess I'll find out tomorrow night.

Bat™