I have 2 step colder plugs NGK Iridium that I used for my nitrous. Will this work well with the ATI Procharger?

Also I plan on using the 9lb pulley. What size injectors should I get. I will be replacing the pistons with 8.5:1 and the rods as well as a cam and head work in the future. Can I run on the stock injectors for now?? Thanks

 

Can't help you with the injectors, but I would probably suggest 1 step colder: NGK Iridium LFR6A1X-11.

 

bump

 

Agreed one step colder plugs and for injectors 380 CC injectors would probably be ok. If not you could for the 440CC injectors that come with the Greddy kit.

 

Ok so the 440cc should be enough when I do th einternal mods? Also is it essential to bump up the injectors for th e9 lb pulley

 

Honestly if you are only going to run the 9 lb pulley you are better off with the 380 CC PE injectors. They drop in and require no hacking. You wont need the 440s..and for your internals utilizing a blower a good idea would be to run 9.5:1 or 9:1.

 

I have six RC 440cc inj from my TT kit for sale. Brand new still in their package. $400
it works great with a TS reflash and your 9lb pulley