Just trying to start building up the excitment. If you know anything about it please post it here. I hope they can get a Turbo Solution for under 4500.

APS vs. Release Date

 

There's been plenty of threads on this already, do a search and see what you come up with.

 

Not that I could find. I only went back to 7/01/04 though. If it hurts you can take it down. Just wanted to see if we could get peter to come in and talk about it.

 

Well, there's info on the APS site. There was a MAJOR thread on this a while back. I'll see if I can dig it up.

 

https://my350z.com/forum/showthread....ngle+turbo+kit

That's the only thread I could find.

I can't believe how badly the search function is working.

Peter, care to chime in on updates, etc.?

 

The heck with the APS single turbo kit.. Where is the damn APS tallboy plenum they promissed us this month?

 

There was a fairly large APS ST thread a while back until "Peter APS" got kicked out, I will try to find it and bring it back to life...

 

wow...
It was deleted!
There was a 5 or so page thread on the APS Single system in here...I swear. I searched everywhere for it...even in the archives. I searched to a year back... What's going on?
There is more info on the APS single at 350motoring.com

 

the aps tallboy plenum has been delayed so they can work on releasing the s/t kit, which they believe to be more of a priority. it was also delayed because they are adding the extra fuel injectors (i guess they already had the plenum mostly done without the extra injectors but then decided to add them). this is info peter released, to the best of my recollection, from another board. there is a lot of info that Peter has released - just not here...look around and you'll find it.

 

I remember it too, oh well.

 

must have been deleted when he was banned.

 

Probably.

Also, I want to add, everyone don't forget that APS is being pushed by 3 or 4 different groups...
APS Single Turbo kit for the 350Z (maybe the G35)
APS Tallboy Plenum with mounting for 6 injectors
APS TT kit for the G35
Find the differences on the Track/35th a.e. model

And that's just the 350Z/G35 crowd, don't forget they also have to make parts for other cars.

 

Still here, I've not had much time to post lately, let me know what you'd like to know and I will try to help out.

Peter

 

Peter-

If you are still here then maybe we can revive the APS single system on this thread.

 

APS Single system Website

APS North American Dealers

Let the Q's Begin.....

....with mine....

> Target MSRP is about $5500 to $6000 US?
> Shipping starts in May?
> Any options for cats? (I don't need to pass CARB, but I need to pass smog...)

(great website by the way, answeres most Q's)

Z_Pilot

 

Ok, what whp/tq could I expect "out of the box" running 93 octane?

 

I thnk it was 386whp...see the website link.

 

they dynoed the s/t kit with the 94 octane tuning @9lbs of boost and iirc got 386hp and around 380lb-ft of torque. that was done with the aps exhaust installed too. boost was a bit over 6psi by 3300rpm, so lag is not bad.

 

I know what they dyno'd at 94 octane and with their exhaust, what I'm asking is without their exhaust and 93 octane. Which is what we can get in Ohio.

 

Your 100% correct with that statement, we at APS have plenty on the go in engineering for the 350Z and the G35, both with single and twin turbo systems, APS engineering staff are make steady progress and the end result from this enginering will be stunning, that's a promise.

Thanks

Peter