I just purchased 6 APS injectors for a really good price. I have been waiting for my UTEC to finally arrive and wanted to be ready for my UTEC, Fuel return, and Injector install. My goal is to be around 410-430RWHP safely. Do you guys think that the APS injectors will be good enough for the power I want?

 

They would be but you have to run at least 58-59 psi of fuel pressure them to work well. APS rates them at 500cc but only at that higher pressure so an adjustable fpr and return system is a must..

 

I will have a return fuel system installed at the same time. I just wanted to make sure for mid 400's RWHP they would be fine. Thanks Mia.

 

No worries man...glad to help out..just make sure when they install the fpr its set to 58-59 psi and you'll be good to go...

 

even at 3.5 bar, they are considered 440 injectors. The APS kit runs at 52 psi with 1:1 rising pressure.

Those injectors should easily handle your power, just like Jason stated, make sure you have the wiring loom (though I am sure you have it)

 

I forgot about the wiring loom. Do I need that? Where can I get that from?

 

Unfortunately we don't have any extras around here, but you can try some of the other APS Dealers.

 

I'm sure GRD has an extra APS injector wiring harness. Give them a call.

 

I hope so. GRD is the one that is doing the install. I just need my UTEC to get there. I have been waiting forever. Thanks guys.