Build it and they will come!!!!

 

I can be real looks like the only thing that would need to be moved is the powersteering res . You don't need no stinken power steering!!!

If you change it I'm building it!!!!!

 

Going to bring this back from the dead as I did not hear any news or updates on this project John any news.

 

Guys - I got held up waiting for the ARP 7/16" L19 studs then John got tired of waiting so he decided to go with 1/2" ARP's since the motor's apart. Now why neither he nor I thought of this before now I'll never know!! Brain fart, perhaps! I believe that John's gonna start assembling the motor after the Memorial Day holiday but if he doesn't, I'm gonna fly to Dallas & get him to push me around the block so I can remember how well my G handles!!

MG

 

Yeah that pretty much sums it up

 

Not to be the skeptic here, but couldn't help but notice:

The vortech logo on the left hand one is the mirror image of the one on the right.
Same goes for the orientation of the blades...

 

On an off note as far as the L19 studs are concerened I was concecerned that the material may be too much for the stock block. As the L19 Material is normally used for Pro Comp cars with no were near factory components. My concern was that the studs would pull out or the block as a result of being too stong.
Scott @SVRT reafirmed my suspision that the 7/16 studs would infact rip out of the block at just about 110lbft of tq. He Also added that he has never had a failure as a result of using the 1/2 studs and maintains that he has been unable to make them fail as a result of over torquing them

 

Photo chop ..Oleg....just a joke .

Im going ahead with the L19 studs and trq. them to 90ftlb's . Will see if it will hold 14psi .

 

Ok haven't psted lately block is awaiting it's spot in line for the mill so that the 1/2 studs can be installed by I figured since everything is broke down I would throw out something a bit of eye candy if you will

 

Nice and shiny . Good job . Want to come up and polish my blower ??????

 

Send it on

Hey that guy never called me about that diff did you end up getting it?????

By the way nice avatar

 

SEND IT ???? you noticed I said ....COME UP !!!

No I never did get it . It just seemed to much of a hassle for every one and I had the head lift happen at the same time . Thanks for the offering to help !!!!!!!!

 

A lot of bling but still no engine in the car.....come on now "get ur dun"

 

OK after many delays I can finally resurect this and post some pics












should have pics of heads withing a week or so and then to the engine dyno for break in and tune