Notices
Forced Induction Turbochargers and Superchargers..Got Boost?

Can Stillen SC take 05 Vette?

Thread Tools
 
Search this Thread
 
Old 08-17-2006 | 02:05 PM
  #101  
vision619's Avatar
vision619
Registered User
 
Joined: Feb 2005
Posts: 300
Likes: 0
From: San Diego
Default

Originally Posted by sentry65
i thought the entire point of the JWT kit was to have some bad *** low end torque?
I take it the weight distribution is the real enemy then because with some hoosier tires, you should have no problem launching
the torque is incredible from the JWT kit. the torque hits instantly removing any turbo lag. but the vette squats like a little bit¢h out of the hole. also gearing is much different. torque is probably the same but the application of it is much different with stock tranny, suspension and gears.

i have raced a brand new Z06 on the freeway with my JWT kit and it was a dead tie until the speed limiter kicked in at 160mph. but off the line. it's just not gonna happen unless you have a Z built purely for drag.
Old 08-18-2006 | 09:48 AM
  #102  
blown in nc's Avatar
blown in nc
Registered User
 
Joined: Jul 2006
Posts: 139
Likes: 0
From: charlotte, nc
Default

The vette's wt ratio is favorable for drag racing? Get real, that's why the world is chasing the C6s like they did the C5s in GT1.

If the vette is stock it will come down to the driver. There are alot of diff gearing ratios from the factory on C5s too--2.73, 3.15 and 3.42. I have a friend that has the roots blower and 3.90 gears on his Z06--it's a head snapper.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bodyboarder81
New Owners
17
11-02-2015 12:17 AM
kyin
New Owners
12
10-15-2015 05:54 AM
Bodyboarder81
Forced Induction
13
09-21-2015 06:23 AM
Nicky R
SoCal Marketplace
0
09-20-2015 01:05 PM



Quick Reply: Can Stillen SC take 05 Vette?



All times are GMT -8. The time now is 01:35 PM.