Does anyone have any links or past threads on how to install boost gauge?
I know which vacuum hose to T into but I dont know how to get it to the middle nav box or what wires i should run the power into..
is there a easy way to get thru the firewall ?

any info would be great..


Mark

 

bump

 

Run the vaccum line through either the OEM harness grommet, or the hole located next to the brake booster on the driver side. Once the line is inside the cabin, you are good to go. The boost gauge requires switched power and ground, which you can find in a vast number of locations under the dash board. Hope that helps.