RPM Bucking at 2500 rpm + 0 boost
Thread Starter
Registered User
iTrader: (2)
Joined: Jan 2005
Posts: 924
Likes: 0
From: Chesterfield, Michigan
okay... had a overheating issue with the trans today... made the numbers and park and **** not show up on the dash... shariff was here at zdayz thank god and was helping me out... we unplugged the ecu's hoping to reboot and maybe get it to work.. but it didnt... then sat for a long time and everything worked! trans is fine now... but now... at 2400 - 2500 rpm... and when the boost gauge is at 0 coming from negatives vaccum... up to boost... it bucks strangely... then goes into boost if pushed and looses boost hard... im guessing there is a leak in the lines somewhere... am i thinking right?
tomorrow ill probably go beg shariff for some more help! cuz im at zdayz and now cant do the dragon till the car is running decent...
tomorrow ill probably go beg shariff for some more help! cuz im at zdayz and now cant do the dragon till the car is running decent...
Thread Starter
Registered User
iTrader: (2)
Joined: Jan 2005
Posts: 924
Likes: 0
From: Chesterfield, Michigan
btw... if anyone is at zdayz also and can help me... i am in the magnolia cabin 621... stop over at anytime,... even super late or early and just bang on the door! ill wake... or my buddy will!
any help will be GREATLY appreciated!
any help will be GREATLY appreciated!
Thread Starter
Registered User
iTrader: (2)
Joined: Jan 2005
Posts: 924
Likes: 0
From: Chesterfield, Michigan
No they don't
but i think the utec is off... the fuel map isnt going to 52 at full boost... it wants to go under...and seems to be runningvery rich... lots of smoke after boost... still gets a chug before going into boost...
any suggestions?
but i think the utec is off... the fuel map isnt going to 52 at full boost... it wants to go under...and seems to be runningvery rich... lots of smoke after boost... still gets a chug before going into boost...
any suggestions?
Trending Topics
Originally Posted by BobaFettm
Shariff fixed it. Utech needed to be set to 0. THANK YOU SHARIFF!!!!
Originally Posted by BobaFettm
Shariff fixed it. Utech needed to be set to 0. THANK YOU SHARIFF!!!!
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM




