Guys i'm not an expert so i need help in picking the right pisstons and connecting rods that will hold well with a TT gready kit hp aim is aprox. 550
i know that the Tomy are 1of the best but i know as well they are very expencive. ive heard that a lot of american brands r good and worth having them on and a lot cheaper any names?

 

many will recommend Arias Extreme Duty pistons and Pauter rods. JE pistons and Carrillo rods are also good choices (depending on budget).

For my engine build, I went with Wiseco pistons and Eagle rods because my hp goals are 475 - 500 whp with rev limit at 7000 rpm.

 

yes thats my problem in here it will probably cost 2666$ non installed and i think thats too much.

what would the arias and th Pauter cost? i will worry about the shipping.

 

It all depends on whether that extra money is worth your piece of mind...Arias and Pauter are going to be the likely recommedations from most of the experts around here.

Just do a little bit of searching on here because this is a popular topic and I'm sure you can find all your answers with all the great threads around the forums!

Good luck

 

http://www.forgedinternals.com/store/home.php for Arias/Pauter prices.

http://www.importperformanceparts.net for Wiseco/Eagle prices ($1030 rod/piston package)

 

I went with Arias Extreme duty pistons 9:1 CR, and the Eagle rods. The Eagle rods are fine for 550rwhp and about half the price of the Pauter rods.

JET

 

I have the JE Pistons and Pauter rods and will be aiming for over 600whp.
I am sure you will get many different recommendations but like others have said, check out JE, Arias, Pauter, Wiseco and Eagle. These appear to cover various price ranges and have fairly good recommendations.

 

Silver, we ship weekly to the Middle East and Europe..lots of happy customers boosting in Kuwait, Bahrain, Saudia Arabia...yalla.

We use some very reasonable shipping methods, and have a special way of preparing our documents so your order arrives safetly.

 

Any forged set will work for those goals and beyond

You could get wisecos pistons and eagle rods for under a grand total and be fine.

I chose Arias and eagles on my setup. Eagles should be good for at least 700 whp and for half the price of pauters, it is a no brainer IMO. If you want overkill peace of mind, I might go with cosworth pistons and rods

 

Z is a new car for me but EVO6 wasn't i know every part and cost in it but i the z i'm still trying so if u have in kwait and saudi well i'm in coz i'm in saudi arabia i'm lebanese by the way but i work here, i will have a look at the web page and we will take it from there.

 

GUYS i wana thank you all for being such a good help

 

Silver Nismo:

You are in good hands. Sharif and Tonydg ( AKA Wld350Z ) were building FI 350z's in early 2004. And both guy's are very precise about the craftsmanship put into every car.

If you use the search function ( with AmyCroft as posting ) and go way back ( any DATE ) , you will see photo's of Tonydg and Sharif installing the first of the Greedy TT's

Cheers Amy -

Edit: Silver Nismo

Here are some links - from the way back machine...
https://my350z.com/forum/showthread....threadid=76970

https://my350z.com/forum/forced-induction/76974-greddy-tt-install-part-two-56k-warn-huge.html

https://my350z.com/forum/southern-california/93044-gq_626-sharif-home-town-dinner-56k-warned.html

And Very Red car photo's with pretty models at the Turbonetic's open house..

https://my350z.com/forum/southern-california/144753-turbonetics-cover-girls-56k-warned.html


https://my350z.com/forum/southern-california/144759-turbonetic-s-cover-girls-2-56k-warned-tanya-win.html

 

AmyCroft thanx for such a great sharing for those pics realy nice stuff and Sharif Big thanx for the help your pics r not bad as well with the young good looking chick hehehe well done. I asked my friend to order the Wiseco/Eagle cause they go ok with my budget and aim of hp i will b intouch for more of your valuble advices thanx again.