help install boost gauge..
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: Pasadena, California
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
help install boost gauge..
OK I just installed a Vortech S/C in my 06, and I wired up my boost gauge.
Everything hooked up fine the gauge has power(defi link master)and now i
need a line to tee off for positive manifold pressure. Where is the best place.
any suggestions?
Everything hooked up fine the gauge has power(defi link master)and now i
need a line to tee off for positive manifold pressure. Where is the best place.
any suggestions?
#2
Damn Noobs
iTrader: (4)
Originally Posted by chrisjennings
OK I just installed a Vortech S/C in my 06, and I wired up my boost gauge.
Everything hooked up fine the gauge has power(defi link master)and now i
need a line to tee off for positive manifold pressure. Where is the best place.
any suggestions?
Everything hooked up fine the gauge has power(defi link master)and now i
need a line to tee off for positive manifold pressure. Where is the best place.
any suggestions?
#3
Registered User
iTrader: (42)
Join Date: Apr 2006
Location: So Cal
Posts: 842
Likes: 0
Received 0 Likes
on
0 Posts
there is a small vacuum line on the back of the plenum, that is a good one to TEE into. Also, in the front of the plenum, you'll find when you remove the cover, that there is a nipple on the passenger side, that is capped off. that one is also prime for using, and in that case you do not need to TEE into anything, just plug it onto that nipple and you'll be good to go!
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM