^^ Problem is, i didn't get any spacers with my injectors or TT kit. Maybe you or Gary can hook me up? What about those other things i posted? Gaskets, and things? Gary still hasn't said whether or not he has those available to next day air. Do you have them available Sharif? Just PM me a price with next day air and how to pay you.

 

I have an extra set of spacers here I can send you..just call the shop and Valerie will take care of it for you.

Gaskets and such...I dont have easy access to. I bet Gary can help you with those.

 

Well, i sent a PM to Gary so we'll see if he can help me out.

What about those TT base maps Sharif? I looked all through my emails and didn't see it.

 

Sorry I am late, havent been on here today.

As already cleared up, you are missing the spacers that come with all sets of RC Injectors for the 350z. They are 0.455" thick. If you need something immediately, you could always pick up a small aluminum bar and cut them to size (if you have the proper tools to accurately do this). I have seen extruded aluminum "spacer" bars at Sears hardware before, that could easily be cut to length, but you would need a band saw to accurately do this.

if your REALLY desperate you could just use a stack of washers (ghetto but functional).

As for what FailSafe said about grinding your plenum, do not worry about that. The CJM rails are manufactured to fit without grinding anything at all. :thumbsup:

EDIT: if you have any other issues, please feel free to shoot me a PM on here, I can send you my cell phone number and we can make sure everything is perfect!

 

I don't suppose you have any of these things you can next day air to me?
Two 3" gaskets
Four 3" exhaust flanges
Those Greddy injector clips to get these 440's to work
A set of Greddy TT gaskets
2" to 2" coupler
2.5" to 2" coupler

 

I havent got any of those... but a good source for couplers would be hightempsilicone.com or atpturbo.com

atpturbo.com has lots of gaskets and flanges, and they might have what you need.

the injector clips are standard RC injector clips that any ricer shop should have around, or any RC dealer can get them for you.

the greddy TT gaskets are going to be the hardest for you to get, you might have to call greddy. since they are stainless steel, they are always reusable - i usually just wire brush them clean before reinstalling, but i am assuming you never got any to begin with?

 

Shoot me an email remind to sharif@forgedperformance.com
And I will email them to you first thing Monday morning.

 

Well.. Looks like i'll get the clips from Sharif. I'll take a look at those sites you posted for gaskets and such.. As for the Greddy gaskets. A few of them are actualy busted up and unusable.

 

Edit

 

Edit

 

You still need that oil line? I've been talking with GReddy, they don't have the specific one that you need but they do have a universal one, so at least you would have the correct flange but, the pipe portion may need to bent, cut and or extended to fit.

Gary

 

Yes, perfect. I'll take it!

 

Cool, give me a call and we can get it out to you.

Thanks,
Gary
888-485-8048