When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Beautiful photos. Thank you for sharing. Worth a thousand words.
Question, all of that hard work, and the intercooler seems a little "boxy" or "square-ish" Do you think rounding off the corners of the end tanks might smooth out the air flow going thru or does it not really matter?
Just a thought. Everything else looks awesome.
I guess the only question I would have is clearance on what appears to be that oil tank down there. That would totally suck to drag that on a bump in the road.
I guess the only question I would have is clearance on what appears to be that oil tank down there. That would totally suck to drag that on a bump in the road.
The oil tank does not sit that low. In fact it is a few inches above the lower cross brace that bolts underneath it. There is no way that it would scrape on the ground.
The oil tank does not sit that low. In fact it is a few inches above the lower cross brace that bolts underneath it. There is no way that it would scrape on the ground.
Ever high center the car? I have an exhaust brace in a similar location (actually a bit higher then that on the drivers side) that has scrapped on speed bumps before. Not saying this kit isn't great as I think it is but there is definitely a risk of scraping that resevoir. Perhaps a splash/debris guard for it. LOL never thought I would be asking for a skid plate on a car...