my super lightweight Z
Thread Starter
Registered User
iTrader: (27)
Joined: Sep 2004
Posts: 4,268
Likes: 1
From: tigard oregon
the color is a little darker and more towards purple than the stock db. it is identical to the primary color in the ppg harlequin blue to red paint. basically, the whole car gets painted that color, then harlequin misted flames go on. when you look directly at the panel the flame design will completely disappear, yet reappear a different color on another part of the car. some candy and pearl flames will be layered in there too! should be quite a thing to see, lol.
going through the motor again for upgrading head studs to 1/2" and a few other goodies and now gunna do the hks v-pro too. may be widening the rears by 2" and slapping a set of 325/20/20's on the back with custom made flares. if i do it, i need to decide to do it in the next week or so.
i have a hood very similar to the c-west hood, greddy front lip, nismo rear spoiler, and custom cut outs in the front bumper. all pretty mild, but i think the impact will be pretty jaw dropping with wheels going all black too.

color test spray out. the strip is the harlequin paint.
going through the motor again for upgrading head studs to 1/2" and a few other goodies and now gunna do the hks v-pro too. may be widening the rears by 2" and slapping a set of 325/20/20's on the back with custom made flares. if i do it, i need to decide to do it in the next week or so.
i have a hood very similar to the c-west hood, greddy front lip, nismo rear spoiler, and custom cut outs in the front bumper. all pretty mild, but i think the impact will be pretty jaw dropping with wheels going all black too.

color test spray out. the strip is the harlequin paint.
Last edited by overZealous1; Aug 11, 2007 at 12:18 AM.
Thread Starter
Registered User
iTrader: (27)
Joined: Sep 2004
Posts: 4,268
Likes: 1
From: tigard oregon
here is a rendition another forum member did. the color is abit off from the true color and replicating the graphics would be next to impossible, but i am digging the all black wheels and black headlights (which is already done) it should be a pretty simple yet sinister look. with all the pearl in the base color though, it goes all purple under flouresent lights!
https://my350z.com/forum/attachment....7&d=1186808516
https://my350z.com/forum/attachment....7&d=1186808516
Thread Starter
Registered User
iTrader: (27)
Joined: Sep 2004
Posts: 4,268
Likes: 1
From: tigard oregon
Originally Posted by Sharif@Forged
It's ATV 350Z...looks nice! 

it does look somewhat buggy-ish
Trending Topics
Hell yes! Next step - take off the hatch and remove that pesky roof with the sawzall!
I'm sure there's more you could chop off while your at it, like those rear fenders and anything concerning "safety". If you're a puzzy you could then put a roll cage in it.
I'm sure there's more you could chop off while your at it, like those rear fenders and anything concerning "safety". If you're a puzzy you could then put a roll cage in it.
Thread Starter
Registered User
iTrader: (27)
Joined: Sep 2004
Posts: 4,268
Likes: 1
From: tigard oregon
Originally Posted by taurran
Hell yes! Next step - take off the hatch and remove that pesky roof with the sawzall!
I'm sure there's more you could chop off while your at it, like those rear fenders and anything concerning "safety". If you're a puzzy you could then put a roll cage in it.
I'm sure there's more you could chop off while your at it, like those rear fenders and anything concerning "safety". If you're a puzzy you could then put a roll cage in it.
the hatch is actually off now. and yes, a cage is in the works.
luckily these cars are like a snap together model and it comes apart like a snap!
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
Gruppe-S
Body Interior
13
May 16, 2016 10:42 PM





