Golden Eagle Vacuum Manifold?
#1
Golden Eagle Vacuum Manifold?
http://www.goldeneaglemfg.com/street.html
Any thoughts on this? I'm thinking about ordering one to eliminate all of the "T's" in my turbo setup. From the looks of it, you just get a pressure signal from the intake manifold, then hook up your boost gauge, MAP sensor, wastegate, etc all directly up to the Vacuum Manifold. Looks pretty cool to me
Last edited by failsafe306; 08-26-2007 at 09:50 AM.
#2
03 CS Track 6MT
iTrader: (5)
Join Date: Apr 2003
Location: USA
Posts: 2,841
Likes: 0
Received 0 Likes
on
0 Posts
I looked at that a long time ago. Its kind of ugly though especially with their Eagle logo. I managed to get one that was a black block without any logos. It was a while back but I think I found it on eBay - cheap as I recall.
#3
Originally Posted by 35ounces
I looked at that a long time ago. Its kind of ugly though especially with their Eagle logo. I managed to get one that was a black block without any logos. It was a while back but I think I found it on eBay - cheap as I recall.
#6
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
I found this:
http://www.bloxracing.com/prod_vacuumManifolds.asp
You can get it in black to make it less noticeable. I hate to bring them up but AAM's throttle body spacer could also be used for this.
http://www.alteredatmosphere.com/mm5...de=350Z_INTAKE
http://www.bloxracing.com/prod_vacuumManifolds.asp
You can get it in black to make it less noticeable. I hate to bring them up but AAM's throttle body spacer could also be used for this.
http://www.alteredatmosphere.com/mm5...de=350Z_INTAKE
Trending Topics
#8
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by failsafe306
nice find Mia
#9
Originally Posted by MIAPLAYA
Why thank you. You could also ask a local machine shop to make one. Just need a small block of aluminum and have them machine out however many ports you need and tap them to 1/8" NPT. You could then powder coat, polish it, etc. Hell they could even put "Failsafe Motorsports" on it if you want them to.
#10
Registered User
iTrader: (3)
Join Date: Jul 2003
Location: Escondido
Posts: 11,373
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by failsafe306
Then I could become a sponsor and sell them $$$$ lol
#13
Vendor - Former Vendor
iTrader: (27)
Originally Posted by failsafe306
Thanks Hal
If you happen to find that part number feel free to post it up.
If you happen to find that part number feel free to post it up.
#15
Registered User
You can try Vibrant Performance their Vaccum Manifold looks so cool
http://vibrantperformance.com/catalo...d1ad07e0c893f0
I Believe that QuadCam Got it, he can comment on it.
http://vibrantperformance.com/catalo...d1ad07e0c893f0
I Believe that QuadCam Got it, he can comment on it.
#17
New Member
iTrader: (6)
Join Date: Nov 2003
Location: Broward County
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
http://www.a1manifolds.com/?OVRAW=va...ID=25720526522
I used one of these, even cheaper, and lots of options... no logo either...
I used one of these, even cheaper, and lots of options... no logo either...
#19
CJ Motorsports
iTrader: (21)
The plenum is thick enough to just drill and tap one or two 1/8 NPT or BSPT ports on by the brake booster. The APS plenum is extremely thick to drill even nicer ports in its casted in additional injector bungs that never got used as they had originally planned for their extreme fuel system.
My car only has one extra vacuum port that I added to the manifold, for the boost controller. The boost gauge has a single T off the EVAP line going behind the throttle body. The stock vacuum port on the front goes to the blow off valves.
My car only has one extra vacuum port that I added to the manifold, for the boost controller. The boost gauge has a single T off the EVAP line going behind the throttle body. The stock vacuum port on the front goes to the blow off valves.
#20
Registered User
iTrader: (12)
Join Date: Jun 2003
Location: Man in the Sun
Posts: 2,222
Likes: 0
Received 0 Likes
on
0 Posts
I hear you can use one of those plastic aquarium air meter blocks. You can even adjust the amount of vacuum you want each accessory to see.
Last edited by g356gear; 08-27-2007 at 10:37 AM.