Vortech with a 2.62 pulley
#23
Registered User
Join Date: Nov 2005
Location: Anniston, Al.
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
The 2.62 will only fit if you mill the lip off of the jackshaft area... or Space it out a 1/4 of an inch.(which i did). i'm working on my setup now to help with the rest of the supporting mods i need now. The belt has not slipped.
#25
Registered User
Join Date: Nov 2005
Location: Anniston, Al.
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
mine is on the stock idlers and cog pulley.. I used a k060926 from gates... it could stand to be alittle longer though.
Last edited by 04treefiddy; 09-13-2007 at 01:05 AM.
#26
Registered User
iTrader: (48)
Originally Posted by 04treefiddy
mine is on the stock idlers and cog pulley.. I used a k060926 from gates... it go stand to be alittle longer though.
do u have pix of your setup? what does the cog pulley look like and are u using a spacer or did u mill the jackshaft?
#27
Registered User
Join Date: Nov 2005
Location: Anniston, Al.
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
I used a spacer and the belt is still almost straight. So there is no issues there. I will take some picks of it this weekend for you. Car is down right now anyways, due to me fixing to put a clutch in it.
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM
seagrasser
Zs & Gs For Sale
6
10-11-2015 03:27 PM