Turbonetics (Open Wastegate)
#21
Registered User
iTrader: (20)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
https://my350z.com/forum/south-east/293914-mtn-run-ga-last-sunday-of-every-month-5.html
Here's a very short vid (very short) of my open dump. I hope it's justifiable for you. I didn't know the guy was filming and other factors were at play. So I didn't have much time to react. I hope this helps some. Vids don't always to it justice. But this ones pretty good. Scroll down to post 89, at the bottum of all the pics you'll see a vid. Just click on it.
Here's a very short vid (very short) of my open dump. I hope it's justifiable for you. I didn't know the guy was filming and other factors were at play. So I didn't have much time to react. I hope this helps some. Vids don't always to it justice. But this ones pretty good. Scroll down to post 89, at the bottum of all the pics you'll see a vid. Just click on it.
#22
Registered User
iTrader: (68)
Join Date: Jul 2005
Location: Oceanside, CA
Posts: 2,443
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by VIZAGE
See in the pic that TayTay posted. That's the old style piping for the turbine housing inlet. The wastesgate is mounted directly off the pipe. The newer pipe, know as the wastegate relocation is basically the same pipe with an added outlet that juts off that pipe to move the wasetgate further out. Then they also add another pipe, in the shape of a "U" that comes from the bottom the wastegate and attaches to the pipe you posted. That U pipe would be the one you cut and the pic you posted should be blocked off. This is how it's setup on my car. I hope this makes some since.
Now I could be a little wrong on the older style. And from what I can tell, you would have to turn the wastegate 180 degree's and attach a small downpipe to vent the hot gases away from other parts.
I'll be glad to discuss this with you further, to have a beter understanding. PM me your number and I'll call ya. I have free long distance.
Now I could be a little wrong on the older style. And from what I can tell, you would have to turn the wastegate 180 degree's and attach a small downpipe to vent the hot gases away from other parts.
I'll be glad to discuss this with you further, to have a beter understanding. PM me your number and I'll call ya. I have free long distance.
*Note the car I posted was Ipchecks car, I actually got the idea from him first. But I have the new piping and its still the same setup. Forgot to add you have to buy a block off plate (you can get them from TN) to block off the hole left where the wastegate is suppose to recirculate.
I try and see if I can find more pictures of my setup.
T
#24
Registered User
iTrader: (68)
Join Date: Jul 2005
Location: Oceanside, CA
Posts: 2,443
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by taurran
Hopefully I'll have some vids of a REAL open dumped turbonetics setup soon. ![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
Well hurry up with that REAL setup then. You have others waiting to follow in you footsteps
![hello](https://my350z.com/forum/images/smilies/hello.gif)
T
#25
Registered User
iTrader: (13)
Join Date: Jun 2005
Location: In the wrong lane
Posts: 6,433
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by TayTaythatsme04
^^Fun, but its so much funnier scaring a lady walking her dog down the street.
T
T
I love WOT bursts underneath bridge overpasses though
![](https://my350z.com/forum/images/smilies/icon17.gif)
#26
Registered User
iTrader: (68)
Join Date: Jul 2005
Location: Oceanside, CA
Posts: 2,443
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by diwun67
So cruel lol
I love WOT bursts underneath bridge overpasses though![](https://my350z.com/forum/images/smilies/icon17.gif)
I love WOT bursts underneath bridge overpasses though
![](https://my350z.com/forum/images/smilies/icon17.gif)
Oh yes, WOT right as you drive by the people turning left, all with there windows down
![](https://my350z.com/forum/images/smilies/icon38.gif)
#27
Registered User
iTrader: (13)
Join Date: Jun 2005
Location: In the wrong lane
Posts: 6,433
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by TayTaythatsme04
Oh yes, WOT right as you drive by the people turning left, all with there windows down![](https://my350z.com/forum/images/smilies/icon38.gif)
![](https://my350z.com/forum/images/smilies/icon38.gif)
![hehehe](https://my350z.com/forum/images/smilies/lol.gif)
#30
Registered User
iTrader: (8)
Join Date: Jul 2004
Location: Bellevue, Ne
Posts: 2,386
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Redline....
If you want to hear a set of open gates man, contact Seth and go up to Sonics when they are tuning my car up. I've got it on my TT and you can definately hear an apreciable noise diffrence. In Seths words, "It's ******* loud!" If you want I can give you a ride in it when I get back so you can hear it from the cockpit.
You definately hear a diffrence. Piping should be piping as long as the angle is right. They are fairly simple design. Just a flange that matches your turbo and a long enough pipe to route it out.
If you want to hear a set of open gates man, contact Seth and go up to Sonics when they are tuning my car up. I've got it on my TT and you can definately hear an apreciable noise diffrence. In Seths words, "It's ******* loud!" If you want I can give you a ride in it when I get back so you can hear it from the cockpit.
You definately hear a diffrence. Piping should be piping as long as the angle is right. They are fairly simple design. Just a flange that matches your turbo and a long enough pipe to route it out.
Last edited by punish_her; 09-22-2007 at 09:09 AM.
#31
Registered User
iTrader: (1)
Join Date: Dec 2003
Location: Port Orchard, WA
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by punish_her
Redline....
If you want to hear a set of open gates man, contact Seth and go up to Sonics when they are tuning my car up. I've got it on my TT and you can definately hear an apreciable noise diffrence. In Seths words, "It's ******* loud!" If you want I can give you a ride in it when I get back so you can hear it from the cockpit.
You definately hear a diffrence. Piping should be piping as long as the angle is right. They are fairly simple design. Just a flange that matches your turbo and a long enough pipe to route it out.
If you want to hear a set of open gates man, contact Seth and go up to Sonics when they are tuning my car up. I've got it on my TT and you can definately hear an apreciable noise diffrence. In Seths words, "It's ******* loud!" If you want I can give you a ride in it when I get back so you can hear it from the cockpit.
You definately hear a diffrence. Piping should be piping as long as the angle is right. They are fairly simple design. Just a flange that matches your turbo and a long enough pipe to route it out.
#32
Registered User
iTrader: (20)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by TayTaythatsme04
*Note the car I posted was Ipchecks car, I actually got the idea from him first. But I have the new piping and its still the same setup. Forgot to add you have to buy a block off plate (you can get them from TN) to block off the hole left where the wastegate is suppose to recirculate.
I try and see if I can find more pictures of my setup.
T
I try and see if I can find more pictures of my setup.
T
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
#33
Registered User
Thread Starter
iTrader: (3)
Join Date: Aug 2004
Location: Miami
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Got my wastegate / open dump done today @ japtrix in west palm, fl while I was there I also got my car retuned, since I have added the following mods since my last tune. new hks ti carbon exhaust (single), fixed my wastegate/bov vacuum lines which were reversed and got my open dump. overall I was impressed with the dyno results. * note these are results from a mustang dyno and are 8-12% lower than dynojet #s o and only 7.2 lbs of boost. ENJOY!!! btw i love the open dump =)
390rwhp / 356tq
390rwhp / 356tq
![](http://i120.photobucket.com/albums/o189/rocejo/DynoSheet1.jpg)
#35
![Default](https://my350z.com/forum/images/icons/icon1.gif)
That is nice for 7.2 psi. This comming weekend at the meet my buddy has a built turbo IS with an open dump, now I have yet to hear a Open dump on a Z, but his car is crazy loud. I think a lot of Z guys are going to like his car. Scares me everytime I "try" to hang with it.
Chris
I am stock btw... so there is no keeping up![Embarrassment](https://my350z.com/forum/images/smilies/redface.gif)
edit: Juice what did you put down before the exhaust?
Chris
I am stock btw... so there is no keeping up
![Embarrassment](https://my350z.com/forum/images/smilies/redface.gif)
edit: Juice what did you put down before the exhaust?
Last edited by NA&CH; 09-25-2007 at 03:00 PM.
#36
Banned
iTrader: (21)
Join Date: Dec 2003
Location: Florida
Posts: 4,472
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by 350zOnJuice
Got my wastegate / open dump done today @ japtrix in west palm, fl while I was there I also got my car retuned, since I have added the following mods since my last tune. new hks ti carbon exhaust (single), fixed my wastegate/bov vacuum lines which were reversed and got my open dump. overall I was impressed with the dyno results. * note these are results from a mustang dyno and are 8-12% lower than dynojet #s o and only 7.2 lbs of boost. ENJOY!!! btw i love the open dump =)
390rwhp / 356tq
![](http://i120.photobucket.com/albums/o189/rocejo/DynoSheet1.jpg)
390rwhp / 356tq
![](http://i120.photobucket.com/albums/o189/rocejo/DynoSheet1.jpg)
Bring your car up to Bradenton on this coming Sunday at the big event if you can.Their will be alot of TN guys that would like to hear it in person..PM me if you need more info about the 30th