Special bearing sleeve for the Carbonetics/ATS twin carbon clutch?
12-04-2007, 04:36 AM
#1
Special bearing sleeve for the Carbonetics/ATS twin carbon clutch?
Hi,
Sorry for posting this in F/I, but people with F/I have most experience with this clutch, so I'm posting here. For my project, I bought the ATS/Carbonetics twin carbon clutch with Nissan OEM bearing with OEM bearing sleeve. But, my mechanic tells me he can't shift into any of the gears.. I check everything and also figured out that the thickness of the ATS twin carbon clutch is about 1inch(20mm) narrower than the stock clutch.
So, do I need a thicker bearing sleeve with this clutch or what? Thanks for your help in advance~!
Sorry for posting this in F/I, but people with F/I have most experience with this clutch, so I'm posting here. For my project, I bought the ATS/Carbonetics twin carbon clutch with Nissan OEM bearing with OEM bearing sleeve. But, my mechanic tells me he can't shift into any of the gears.. I check everything and also figured out that the thickness of the ATS twin carbon clutch is about 1inch(20mm) narrower than the stock clutch.
So, do I need a thicker bearing sleeve with this clutch or what? Thanks for your help in advance~!
Thread
Thread Starter
Forum
Replies
Last Post
30501, 30501u8584, 350z, bearing, carbon, carbonetic, carbonetics, carboneticsats, change, clutch, nissan, sleeve, thickness, twin, u8584
