Can someone clarify something for me? Im in the process of installing my kit and I have the fmu together and the pump together but my question is this....
there is a vac line that attaches on the front of the FMU that you connect a 5/32 hose to does that then tee into the BPV and then up to a tee in the ss box and then into the manifold? And for the vent hose is that just open facing the ground??

Thanks Guys

 

Yes ...you can connect all the vacuum hoses with T fittings and then up to the plenum . The vent hose coming off the vlave cover should be ran back to the intake air filter an the blower

 

thanks for the help really appreciate it

 

i think he meant the vent hose on the FMU. I was never able to keep the vent hose connected to the little nub on the FMU, so good luck with that. Either way it's just a small hose that vents towards the ground so water doesn't get in it.