Need help installing Precision 1000cc Injectors
06-22-2008, 08:06 AM
#25
Registered User
Thread Starter
iTrader: (2)
Join Date: Oct 2006
Location: South Texas
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
i just used a resistor, 6 of em... 1 dollar a piece. Seems to be working just fine. So 1000cc and UTEC is possible. Either buy the injecor drivers or a 10watt 10 ohm resistor for each injector. Either way will do the job just fine.
06-22-2008, 06:46 PM
#31
Registered User
Thread Starter
iTrader: (2)
Join Date: Oct 2006
Location: South Texas
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
I know the difference between low and high impedance injectors, I had just forgotten that the stock injectors were high impedance. Should've known better since my 92 Z is the same way... The resistors I used are 10watt 10ohm resistors, you can find em at any Radio Shack.
I didnt drive the car much today, but between yesterday and today I had no startup issues. I will let you know tomorrow how the start ups throughout the day feel.
I didnt drive the car much today, but between yesterday and today I had no startup issues. I will let you know tomorrow how the start ups throughout the day feel.
Last edited by redzzand; 06-22-2008 at 06:50 PM.
06-22-2008, 06:52 PM
#33
Registered User
Thread Starter
iTrader: (2)
Join Date: Oct 2006
Location: South Texas
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
the car is running and right now Im running the stock spring pressure of 8psi. Tomorrow I will hook up my AEM boost soleniod and go from there.
Thread
Thread Starter
Forum
Replies
Last Post
