What does this code mean?
03-25-2010, 08:00 AM
#22
Registered User
iTrader: (1)
Join Date: Sep 2006
Location: miami
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
I had this problem in my Z for about 6 months and i went crazy with this code until JAPTRIX found the problem, apparently the sensor in the "GAS PEDAL ASSEMBLY" was sending bad codes to the "UTEC" so i had to change both parts and problem solved, i never had any problems again with either one....
03-25-2010, 01:08 PM
#24
Yea i'm thinking the same thing rafa and quad are.
OP, sounds like your in the same boat as many of us with the Utec's, they all go into limp mode right when you need them not to.
I disconnected my utec, swapped to stock injectors, left just my stock ecu, and disconnected the charge pipe and put a filter on, and what ya think happened, no more limp mode. So either it's A) the turbo system (doubtful) or B) the Utec causing the issue (most likely).
Sounds like the Utec is a failing system for our cars unless TurboXS can fix this ridiculous issue.
OP, sounds like your in the same boat as many of us with the Utec's, they all go into limp mode right when you need them not to.
I disconnected my utec, swapped to stock injectors, left just my stock ecu, and disconnected the charge pipe and put a filter on, and what ya think happened, no more limp mode. So either it's A) the turbo system (doubtful) or B) the Utec causing the issue (most likely).
Sounds like the Utec is a failing system for our cars unless TurboXS can fix this ridiculous issue.
Thread
Thread Starter
Forum
Replies
Last Post
etkms
Engine & Drivetrain
29
06-19-2022 06:30 PM
Colombo
Forced Induction
35
11-09-2020 10:27 AM
350Z Project X
Maintenance & Repair
11
10-17-2015 05:16 PM
