Installing my 1st SC on a Friends G35.
11-24-2008, 05:26 PM
#1
Installing my 1st SC on a Friends G35.
2003 Infinite G35.
Here is what i've done so far today. SC is in and most of the vacuum hoses are run + the 550 injectors. Inline fuel pump tomorrow plus gauges. He has a Left side spark tube seal leak in which i had to replace his valve cover as well. Compression test shows normal #'s and is fine. I should have it all complete by end tomorrow. This is my 1st SC so lets hope it turns out well.
NBFC Performance.
Here is what i've done so far today. SC is in and most of the vacuum hoses are run + the 550 injectors. Inline fuel pump tomorrow plus gauges. He has a Left side spark tube seal leak in which i had to replace his valve cover as well. Compression test shows normal #'s and is fine. I should have it all complete by end tomorrow. This is my 1st SC so lets hope it turns out well.
NBFC Performance.
Last edited by Dr. Venture; 11-28-2008 at 06:03 PM.
Trending Topics
11-25-2008, 08:49 AM
#11
haha tell me about it. I yelled at the guy for hours about it. He was washing his engine bay over the summer, and a lot of parts are also rusted which im like JESUS CHRIST!! But he plans to polish most of it up when im done and get it back to looking normal again.
11-28-2008, 05:59 PM
#12
Ok all is complete and running yay. I got 2 video's Pre Tune. I'll make better video's after the tune.
If you notice the ATI kit was an incomplete one, and i had my buddy buy the AEM Fuel Psi Regulator and used that in place of the 4 way coupler that is provided in the ATI kit. We also used a different Fuel Pump mounted differently from the ATI and fabricated a new mount for the regulator as well. Not sure if you can notice, but while i was making the finishing touches i had the owner with a brillo mesh bad clean his damn intake manifold off also helping in the future idea of polishing it.
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i279.photobucket.com/player.swf?file=http://vid279.photobucket.com/albums/kk159/DoctorVenture/NBFC%20SC%20Install%2003%20G35/MOV00806.flv">
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i279.photobucket.com/player.swf?file=http://vid279.photobucket.com/albums/kk159/DoctorVenture/NBFC%20SC%20Install%2003%20G35/MOV00808.flv">
The guy whose car it is works at jiffy lube down the road, don't think im a jiffy lube as well. Ha Ha. The Video's are Pre Tune shot, so i will have the after tune vids up plus some road test vids as well.
If you notice the ATI kit was an incomplete one, and i had my buddy buy the AEM Fuel Psi Regulator and used that in place of the 4 way coupler that is provided in the ATI kit. We also used a different Fuel Pump mounted differently from the ATI and fabricated a new mount for the regulator as well. Not sure if you can notice, but while i was making the finishing touches i had the owner with a brillo mesh bad clean his damn intake manifold off also helping in the future idea of polishing it.
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i279.photobucket.com/player.swf?file=http://vid279.photobucket.com/albums/kk159/DoctorVenture/NBFC%20SC%20Install%2003%20G35/MOV00806.flv">
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i279.photobucket.com/player.swf?file=http://vid279.photobucket.com/albums/kk159/DoctorVenture/NBFC%20SC%20Install%2003%20G35/MOV00808.flv">
The guy whose car it is works at jiffy lube down the road, don't think im a jiffy lube as well. Ha Ha. The Video's are Pre Tune shot, so i will have the after tune vids up plus some road test vids as well.
Last edited by Dr. Venture; 11-28-2008 at 06:19 PM.
