Who says vortechs can't make power...
09-22-2009, 01:52 PM
#65
It's a 2.62...although I don't know if there's much of a difference between a 2.62 and 2.60 pulley...I'm more worried about slippage; I get that at about 12.5~13 psi on my revup kit...
http://www.gtmotorsports.com/product...roductid=16472
If your custom pulley is cheaper that GTMs I may go your route of getting that pulley...
Also, since you're a Cali guy, do you have your fuel regulator out in the open in the engine on your RFS setup, or are you "stealthing" it...
I ask since I try and keep my setup looking as stock as possible just in case I get pulled over...Cali sucks like that...
http://www.gtmotorsports.com/product...roductid=16472
If your custom pulley is cheaper that GTMs I may go your route of getting that pulley...
Also, since you're a Cali guy, do you have your fuel regulator out in the open in the engine on your RFS setup, or are you "stealthing" it...
I ask since I try and keep my setup looking as stock as possible just in case I get pulled over...Cali sucks like that...
Last edited by 350z006; 09-22-2009 at 01:53 PM.
09-22-2009, 02:36 PM
#66
you can get 2.6 pulleys from 928m for ~70 each (although I am not sure if we have a 17 or 200 shaft)
http://www.928motorsports.com/parts/powerpulley.php
or
http://www.928motorsports.com/parts/6ribpulley.php
get yourself a 2.25
still need to get it lathed but they are CHEAP
http://www.928motorsports.com/parts/powerpulley.php
or
http://www.928motorsports.com/parts/6ribpulley.php
get yourself a 2.25
still need to get it lathed but they are CHEAP
09-22-2009, 05:20 PM
#69
ahh so you got one of the Reicherd Racing ultra grips then huh?
ya those are pricier and chew up belts, so keep an eye on that. you bust your serp belt, you are f'd
although spinning the blower at 64,000 might get ya 1st
ya those are pricier and chew up belts, so keep an eye on that. you bust your serp belt, you are f'd
although spinning the blower at 64,000 might get ya 1st
Last edited by str8dum1; 09-22-2009 at 05:24 PM.
09-23-2009, 01:26 AM
#71
New Member
iTrader: (8)
Join Date: Oct 2008
Location: S.Africa
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Curious, see str8dum1 mentioned you needed larger injector to break 500whp...you're still on the 800cc and what's your IDC at?
What's the max you can spin that T trim at safely?....if 64000, sounds to high.
What's the max you can spin that T trim at safely?....if 64000, sounds to high.
09-23-2009, 10:04 PM
#76
Anyway, I doubt it's really going to affect it much bc the rpms fly sooo fast for it to do any real damage (only 400rpm difference from 6600 to 7000). Also if u think about it, everyone seems to be running the 2.87 pulley with a 32/28 so they are also overspinning their blower at 6600rpm... not as much as mine but still over 53000rpms.
Last edited by Mr_pharmD; 09-23-2009 at 10:34 PM.
09-24-2009, 01:57 AM
#77
Hay Mr_PharmD,
I know you have a T-Trim, But what have you done to the Motor?
Can you list out the Details?
Do you have a Larger InterCooler?
Did you do any other modifications to your Vortech Kit other than a T-Trim and a 2.60 Pulley and Injectors?
Note: I have an SC-trim Non Revup 32/28, 2.87 rev to 7100=58,687rpm @ Blower
Thanks
Tim
I know you have a T-Trim, But what have you done to the Motor?
Can you list out the Details?
Do you have a Larger InterCooler?
Did you do any other modifications to your Vortech Kit other than a T-Trim and a 2.60 Pulley and Injectors?
Note: I have an SC-trim Non Revup 32/28, 2.87 rev to 7100=58,687rpm @ Blower
Thanks
Tim
09-24-2009, 05:33 AM
#78
^did you even look at page 1?
It really doesnt matter. 4000 impeller rpms isnt much but when you are already 5000 rpms past the recommended limits...
But if it fails oh well, if not great. rebuilds are cheap. The blower is still making power.
Next step would be get that bigger 6.7" ATI crank pulley. Alot more belt wrap. Hopefully you can do that soon.
Anyway, I doubt it's really going to affect it much bc the rpms fly sooo fast for it to do any real damage (only 400rpm difference from 6600 to 7000).
Last edited by Mr_pharmD; Today at 02:34 AM.
Last edited by Mr_pharmD; Today at 02:34 AM.
But if it fails oh well, if not great. rebuilds are cheap. The blower is still making power.
Next step would be get that bigger 6.7" ATI crank pulley. Alot more belt wrap. Hopefully you can do that soon.
09-24-2009, 07:51 AM
#79
^did you even look at page 1?
It really doesnt matter. 4000 impeller rpms isnt much but when you are already 5000 rpms past the recommended limits...
But if it fails oh well, if not great. rebuilds are cheap. The blower is still making power.
Next step would be get that bigger 6.7" ATI crank pulley. Alot more belt wrap. Hopefully you can do that soon.
It really doesnt matter. 4000 impeller rpms isnt much but when you are already 5000 rpms past the recommended limits...
But if it fails oh well, if not great. rebuilds are cheap. The blower is still making power.
Next step would be get that bigger 6.7" ATI crank pulley. Alot more belt wrap. Hopefully you can do that soon.
09-24-2009, 08:02 AM
#80
Hay Mr_PharmD,
I know you have a T-Trim, But what have you done to the Motor?
Can you list out the Details?
Do you have a Larger InterCooler?
Did you do any other modifications to your Vortech Kit other than a T-Trim and a 2.60 Pulley and Injectors?
Note: I have an SC-trim Non Revup 32/28, 2.87 rev to 7100=58,687rpm @ Blower
Thanks
Tim
I know you have a T-Trim, But what have you done to the Motor?
Can you list out the Details?
Do you have a Larger InterCooler?
Did you do any other modifications to your Vortech Kit other than a T-Trim and a 2.60 Pulley and Injectors?
Note: I have an SC-trim Non Revup 32/28, 2.87 rev to 7100=58,687rpm @ Blower
Thanks
Tim
Setup: basic stuff
CP heavy duty pistons 9:1 (I should have done 9.5:1)
Eagle Rods
ACL bearings
L19 head studs
PE head gaskets
DW800cc
stock heads
revup oil pump
Nismo R cams
Alphawerk headers
Kinetix cats
borla exhaust
Mrev 2+ with 5/16spacers
AAM stage 1 fuel setup and pump
Koyo radiator and 2 slim fans
pathfinder cooler mod
Competition stage 4 clutch
Vortech T-trim with 2.60
Snow performance stage 2 meth kit
GTM idler
GTM oil cooler
HKS VPRO
HKS knock
HKS CAMP2
Technosquare reflash
AT to MT conversion
New stuff ordered: nismo thermostat, OEM water pump and BBK 8/6pots
