Hal's 6speed street car runs 9.8 @ 148mph!!!

Reply Subscribe

Thread Tools

Search this Thread

Sep 4, 2009 | 07:33 AM

#81

InjectedPerf

Sponsor
Injected Performance

iTrader: (15)

Joined: Jun 2004

Posts: 636

Likes: 0

From: Houston

Quote:

Originally Posted by thom000001

I was on a hoosier bias ply on a 16in wheel for 1 pass....but tire was loosing air FAST (no tubes)...so only did one shakedown pass (my first pass on a bias ply).

I'll deffinately be putting something similar on in the future and going for broke. I can't go to a 15in wheel without changin the rear calipers (brembos), and I know SP had to grind their base rear calipers to fit their 15in wheel.

But its definately an option.

tom

We have not had to grind base rear calipers to fit 15" drag wheels on any 350z/G35c that we have used or test fit them on.

Sep 4, 2009 | 07:35 AM

#82

thom000001

Registered User

Joined: Oct 2007

Posts: 1,891

Likes: 1

From: Chicago

really sweet.....i'll have to look into them.....Maybe we can meetup and test fit one day....we are frickin neighbors basically lol.

btw slicks look stupid good on my car IMHO
*note....briguy are pics are from the same track lol

Tom

Quote:

Originally Posted by BriGuyMax

My 15in weld prostars fit perfectly with my stock rear calipers.

Last edited by thom000001; Sep 4, 2009 at 07:41 AM.

Sep 4, 2009 | 11:42 AM

#83

marra23

New Member

iTrader: (8)

Joined: Oct 2008

Posts: 457

Likes: 0

From: S.Africa

real hot, also brembo's @ the back....what's the size of those tires?

Sep 4, 2009 | 01:05 PM

#84

Globalscan

Registered User

Joined: Jun 2009

Posts: 318

Likes: 0

From: SRQ, FL

Nice runs

Sep 4, 2009 | 04:00 PM

#85

coachk

Banned

iTrader: (21)

Joined: Dec 2003

Posts: 4,472

Likes: 0

From: Florida

A little squat is good

This is not....http://www.youtube.com/watch?v=vjE-wHsjZ_E

oldie but a goodie

Sep 5, 2009 | 02:52 AM

#86

zman1982

Registered User

iTrader: (19)

Joined: May 2009

Posts: 327

Likes: 1

From: Lebanon, PA

Fukin awesome man

Sep 5, 2009 | 04:34 AM

#87

bigcloud

New Member

iTrader: (7)

Joined: Feb 2008

Posts: 2,596

Likes: 0

From: Washington, DC

Awesome pass Hal!!! A daily driven 9sec Z!!! I love it!! Can't wait to see more!!!

Sep 5, 2009 | 05:48 AM

#88

BriGuyMax

Turbo Whore

iTrader: (4)

Joined: Oct 2002

Posts: 7,303

Likes: 1

From: West suburbs of Chi-town

Quote:

Originally Posted by thom000001

I don't have brembos on the rear though....so if you have them (which I think you said you did), my wheels wont fit your car.

We are basically neighbors. Can't believe I haven't seen your car around.

Sep 5, 2009 | 06:06 AM

#89

doug

New Member

iTrader: (5)

Joined: Sep 2002

Posts: 16,838

Likes: 35

From: Apex, NC

Quote:

Originally Posted by BriGuyMax

We are basically neighbors. Can't believe I haven't seen your car around.

tom doesn't go to gay bars

Sep 7, 2009 | 07:08 AM

#90

240zx

Registered User

iTrader: (2)

Joined: Jun 2005

Posts: 132

Likes: 0

From: Creepin'

Awesome! Are you still on the 3.5 gears? In what gear and at what RPM are you crossing the traps? Congrats again on the great time!

Sep 7, 2009 | 11:39 AM

#91

Dynosty

Thread Starter

Vendor - Former Vendor

iTrader: (27)

Joined: Jan 2007

Posts: 2,137

Likes: 11

From: Louisville, KY

Quote:

Originally Posted by 240zx

Awesome! Are you still on the 3.5 gears? In what gear and at what RPM are you crossing the traps? Congrats again on the great time!

Stock unopened rear dif, and I am crossing at top of 4th (~8300rpm) or just into 5th. Thanks

Sep 8, 2009 | 01:58 PM

#92

D-tuned

Registered User

iTrader: (3)

Joined: Nov 2006

Posts: 175

Likes: 0

From: virginia beach,VA

Any head work or cams? You have a rev up motor?

Sep 8, 2009 | 02:10 PM

#93

InjectedPerf

Sponsor
Injected Performance

iTrader: (15)

Joined: Jun 2004

Posts: 636

Likes: 0

From: Houston

Quote:

Originally Posted by D-tuned

Any head work or cams? You have a rev up motor?

No headwork. BC Stage 3 cams. Non revup cylinder heads.

Sep 8, 2009 | 02:10 PM

#94

Dynosty

Thread Starter

Vendor - Former Vendor

iTrader: (27)

Joined: Jan 2007

Posts: 2,137

Likes: 11

From: Louisville, KY

Quote:

Originally Posted by D-tuned

Any head work or cams? You have a rev up motor?

Non-Revup motor. Stock heads with BC stage 3 (272) cams, BC springs and retainers, BC stock size valves.

Sep 8, 2009 | 08:20 PM

#95

BriGuyMax

Turbo Whore

iTrader: (4)

Joined: Oct 2002

Posts: 7,303

Likes: 1

From: West suburbs of Chi-town

Quote:

Originally Posted by doug

tom doesn't go to gay bars

Sep 9, 2009 | 07:54 PM

#96

weelman1

Registered User

iTrader: (4)

Joined: Sep 2007

Posts: 41

Likes: 0

From: Philadelphia

Thats sick. Are you using the stock fuel rail?

Last edited by weelman1; Sep 9, 2009 at 08:07 PM.

Sep 9, 2009 | 08:38 PM

#97

Dynosty

Thread Starter

Vendor - Former Vendor

iTrader: (27)

Joined: Jan 2007

Posts: 2,137

Likes: 11

From: Louisville, KY

Quote:

Originally Posted by weelman1

Thats sick. Are you using the stock fuel rail?

No, I am using these fuel rails.

Sep 10, 2009 | 04:49 AM

#98

str8dum1

New Member

iTrader: (11)

Joined: Oct 2007

Posts: 8,807

Likes: 7

From: raleigh-wood NC

any other pics of how you modified the radiator support and custom radiator/ac condensor? or will that give away trade secrets

Sep 10, 2009 | 05:42 AM

#99

silent nite

Registered User

Joined: Oct 2008

Posts: 35

Likes: 0

From: central florida

Nice job Hal.You give some of us single turbo guys hope.

Nov 26, 2009 | 10:02 PM

#100

xilovelsdx

Registered User

iTrader: (1)

Joined: Jun 2008

Posts: 117

Likes: 0

From: Titusville, FL

I am in love.

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
5 / 7
Next
Last

Forum Jump