Thanks Ariel, I'll get in touch with Sam@GTM.

Do you recall the diameter of the piping? I need to know if I need a reducer for the coupler (silicon)

 

Hey Ariel, Are you sure this can fit with the crash bar still attached? See below?

 

The piping from gtm is 2.5". You will need an a coupler adapter for the inlet since it is 3".

In my case, i used a 3" extender. I used a refular coupler in between the coupler and the inlet. But, for the extwnder and piping, i used a coupler adapter 3"-2.5"

 

100% sure. The piping is installed in my car already and there was no clearance issues with the crash bar. It fits right in between the headlight and crash bar.

 

Thanks Ariel!!

So just to confirm, the inlet piping from the HKS SC is 3" and the GTM piping is 2.5"

So i will need a 3" to 2.5" reducer coupler?

 

yes sir, provided that you will be using a 3" extender.

 

Sorry, i'm confused.

The supercharger intake diameter is 3" or 2.5"?

The black coupler next to the SC belt:

 

I think it is 3"

 

Just in case anyone is intrested.

It's all for sale.

https://my350z.com/forum/turbos-nitr...ml#post8959224

 

GLWS!

It's sad to see you part out and sell the zee, but at least your still in the zee community!

 

Any of you guys running oem exhaust/plenum/cats???

I gotta make my car as OEM as possible. Stupid CA laws!! #!!$!#~!#!~

 

Sorry Ariel,

Nothing OEM at all!

Btw, what size pulley are pulley usin? And do you have the belt part number?

 

I'm using the 10psi pulley along with the 6-rib PK1700 and 7-rib PK1060.

 

Thanks Ariel, what size is the 10psi pulley though? 85mm?

 

yup.

 

I read the post about an idler pulley, do i need to change this when changing the pulley?

 

If you swap the blower pulley between 6psi-10psi, you'll only need the proper belts. Can you re-phrase the post about the idler pulley? I might be missing something.

-A

 

ahh ok, my have been related to the GTM stage 5 kit then.

 

Heads up guys!!!

Sam from GTM has put together a GTM HKS POWER UPGRADE PACKAGE


http://www.gtmotorsports.com/product...cat=258&page=1

 

^LOL.. that is the piping I recently bought... What size pulley is that?