My HKS S/C Installation
#582
New Member
iTrader: (2)
Join Date: Dec 2008
Location: Sydney
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Mines in the it's final stage of tuning, those of you that went the Osiris tune who needed to upgrade the MAF to the PMAS? I'm going with the DW 600's and my tuner here is tuning the factory ecu, kind of like Osiris .
#589
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Would cams get you ~50whp+ gains along with cats and a tune? maybe someone with more expertise can help us out.
from gtm on an AT:
![](http://i338.photobucket.com/albums/n428/itozann/fromgtm.jpg)
check:
http://www.hks-power.co.jp/db/produc...2007-AN006.pdf
http://translate.google.com/translat...Fcamshaft.html
Last edited by ITOzann; 11-05-2010 at 12:56 PM.
#593
New Member
iTrader: (2)
Join Date: Dec 2008
Location: Sydney
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Hey guys just thinking / planning ahead. I noticed at the GTM site they carry the HKS S/C Traction Fluid for about $200 and Rotrex for about half the price.
Does any one know if these are the same?
Does any one know if these are the same?
#595
Registered User
iTrader: (3)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
BTW, I sold my car, SC kit, Endless BBK, ARC catch can, ARC cooling panel, but all the other parts are still available. I will be posting FS part out thread. But if anyone is interested in any of the parts listed in my lt previous post, pm me.
Also, the buyer of my SC kit, wanted to only run the stock 6psi pulley, so I will have a GTM 9/10 psi pulley and belt FS. pm if interested.
Also, the buyer of my SC kit, wanted to only run the stock 6psi pulley, so I will have a GTM 9/10 psi pulley and belt FS. pm if interested.
#598
New Member
iTrader: (2)
Join Date: Dec 2008
Location: Sydney
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Finally!!!
Just picked up my Zed from my tuner. Revup! '06 Track Roadster and just for reference the HKS kit for the DE fits. There is a a couple of qualifications -
1. Check post #150 by cdoxp800 this will explain the drive belt and pulley arrangement you will need. Early revups retained the DE layout, later ones deleted the fan pulley, so you may need to retro fit for the kit to work or get a new drive belt organised.
2. The Fcon unit supplied is programmed for the DE ( camshaft timing on inlet only ). So you may need to talk to HKS Pro Dealer to see if they can unlock and re-program. Otherwise you will need to go with an after market ECU.
The blower bracket bolts straight on to the block and the rest fits perfectly with a bit of jiggling here and there. I had to remove the roadster chassis counter weight to enable the intercooler piping to hook up.
Thanks the guys at MVP for supplying the kit, very helpful gentlemen
Hope this helps, the kit is of very high quality and can be fitted if competent.
Here is a pic for revup fitting
http://images.ibsrv.net/ibsrv/res/sr...attach/jpg.gif
Just picked up my Zed from my tuner. Revup! '06 Track Roadster and just for reference the HKS kit for the DE fits. There is a a couple of qualifications -
1. Check post #150 by cdoxp800 this will explain the drive belt and pulley arrangement you will need. Early revups retained the DE layout, later ones deleted the fan pulley, so you may need to retro fit for the kit to work or get a new drive belt organised.
2. The Fcon unit supplied is programmed for the DE ( camshaft timing on inlet only ). So you may need to talk to HKS Pro Dealer to see if they can unlock and re-program. Otherwise you will need to go with an after market ECU.
The blower bracket bolts straight on to the block and the rest fits perfectly with a bit of jiggling here and there. I had to remove the roadster chassis counter weight to enable the intercooler piping to hook up.
Thanks the guys at MVP for supplying the kit, very helpful gentlemen
Hope this helps, the kit is of very high quality and can be fitted if competent.
Here is a pic for revup fitting
http://images.ibsrv.net/ibsrv/res/sr...attach/jpg.gif
Last edited by pez1111; 11-16-2010 at 01:26 PM.