My HKS S/C Installation
#70
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Ariel
#77
Registered User
iTrader: (3)
Join Date: Jan 2009
Location: Long Island, New York
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Pulley is not the problem..... u definately have the 85mm pulley...
U guys let me know what u think just by looking at these pictures.....I provided a picture of a stock (95mm) and an (85mm) as well as a copied pic of itozann's install on page 1 of this thread.
Easiest way to tell on the pulley size is that with the 85mm pulley installed u can see the housing of the supercharger behind the pulley and of the stock 95mm u cannot. In the pics this looks like a shiny ring around the pulley!
Also just so everyone knows the deal this kit came off of Marbles car which made 394 whp with an a/t. GTM removed the kit and I bought it from them and then sold it to itozann due to decided to go for a twin setup. Sam at GTM has agreed that this is the 85mm pulley. I honestly would be more that happy to buy another pulley for him but this is not the case. Couple hundred dollars is not worth all this trouble.
![](http://media.share.ovi.com/m1/s/1932/f06abd5a3fc4457d9e55a694087fe646.jpg)
U guys let me know what u think just by looking at these pictures.....I provided a picture of a stock (95mm) and an (85mm) as well as a copied pic of itozann's install on page 1 of this thread.
Easiest way to tell on the pulley size is that with the 85mm pulley installed u can see the housing of the supercharger behind the pulley and of the stock 95mm u cannot. In the pics this looks like a shiny ring around the pulley!
Also just so everyone knows the deal this kit came off of Marbles car which made 394 whp with an a/t. GTM removed the kit and I bought it from them and then sold it to itozann due to decided to go for a twin setup. Sam at GTM has agreed that this is the 85mm pulley. I honestly would be more that happy to buy another pulley for him but this is not the case. Couple hundred dollars is not worth all this trouble.
![](http://media.share.ovi.com/m1/s/1932/2f62e9d566e34ce3b906067e9408b177.jpg)
![](http://media.share.ovi.com/m1/s/1932/f06abd5a3fc4457d9e55a694087fe646.jpg)
![](http://media.share.ovi.com/m1/s/1932/aa44f13b2a5c4e8ca7c9a3bdebebcdfd.jpg)
Last edited by DaytonaBlue55; 04-09-2010 at 10:27 AM.
#79
Registered User
iTrader: (12)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Agreed. The top one is 85mm. I just measured mine with a caliper and it was 84.99mm (10 Psi).
![](http://www.cdoxp800.net/z/Pulley_1.jpg)
![](http://www.cdoxp800.net/z/Pulley_2.jpg)
ITOzann,
Question.
1. What MAF are you running? I though I recall you getting a PMAS.
2. What injector size? I think I saw someplace 600cc.
I just don't understand how your only seeing 6 psi unless you have a leak some place.
I know Marbles kit was a stage 4. I almost bought it myself.
![](http://www.cdoxp800.net/z/Pulley_1.jpg)
![](http://www.cdoxp800.net/z/Pulley_2.jpg)
ITOzann,
Question.
1. What MAF are you running? I though I recall you getting a PMAS.
2. What injector size? I think I saw someplace 600cc.
I just don't understand how your only seeing 6 psi unless you have a leak some place.
I know Marbles kit was a stage 4. I almost bought it myself.
#80
Registered User
iTrader: (3)
Join Date: Jan 2009
Location: Long Island, New York
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
closer look before i shipped the kit:
![](http://media.share.ovi.com/m1/s/1766/244d26e676ec484a81000349d09c529b.jpg)
Just shootin out some ideas.......Belt could be slipping.... I know you had to buy one maybe its to big so even with tensioner tightened all the way its still loose
![](http://media.share.ovi.com/m1/s/1766/244d26e676ec484a81000349d09c529b.jpg)
Just shootin out some ideas.......Belt could be slipping.... I know you had to buy one maybe its to big so even with tensioner tightened all the way its still loose