WOW... Really nice!!! that looks soooo SexZ.....

test pipes right?

 

stock cats... I just passed smogs with oem cats, the s/c, and the rest of the stuff... planning on installing the test pipes when I'll boost at 10psi

 

how the heck do you get that flamethrower?

 

^ rich as hell I guess.. It was the first pull....

 

Great looking Z ITOzann. Can not wait to see your numbers. I am still waiting on a idler pulley from GTM.

 

^^ Are you going to run the 10psi pulley?

 

Yep.. GT Stage 4 HKS Kit. 10Psi
GTM forgot to send the Idler pulley that replace the Stock one. I talked with Sam today he said they shipped it out, but I am still waiting.

Looks like yours is running Good. Loved the blue flames. That would be sick at night. LOL

 

sick!!!! lmk once you dyno your car.. I'm still debating if I should go with the 10psi pulley + meth or stay at 6psi...

It would be nice to have the flames hahah but neh.. to much...

 

Will do. I am hopeful it will be tuned on the 23-24th of April. That's provided I ever get the Idler pulley.
I am thinking of taking it to Henson Performance up in Alabama.

 

NICE! Can I ask you for a huge favor.... I bought the kit as a hks stage 4 as well but received a 6psi pulley and I'm stuck at the moment since gtm don't sell the pulley by itself nor the seller wants to accept he sent a 6psi pulely. I wonder if you could take some detail pics of the 10 psi pulley so I can get a local shop to fabricate my own...

Ariel

 

I don't think a picture will help you. You just need to know the diameter of the pulley.

 

Pictures were provided! helps to compare to the current pulley I have. The 10 psi pulley is 85mm in diameter

 

Try http://www.activeautowerke.com/ for a pulley. I bought a smaller rotrex pulley from these guys a few years back.

 

So what size is the 6 Psi pulley in diameter?

 

Is it 100mm?

 

From memory it is 95mm on the Gen 1 HKS SC

 

Pulley is not the problem..... u definately have the 85mm pulley...

U guys let me know what u think just by looking at these pictures.....I provided a picture of a stock (95mm) and an (85mm) as well as a copied pic of itozann's install on page 1 of this thread.

Easiest way to tell on the pulley size is that with the 85mm pulley installed u can see the housing of the supercharger behind the pulley and of the stock 95mm u cannot. In the pics this looks like a shiny ring around the pulley!

Also just so everyone knows the deal this kit came off of Marbles car which made 394 whp with an a/t. GTM removed the kit and I bought it from them and then sold it to itozann due to decided to go for a twin setup. Sam at GTM has agreed that this is the 85mm pulley. I honestly would be more that happy to buy another pulley for him but this is not the case. Couple hundred dollars is not worth all this trouble.

 

top one is the 85mm

 

Agreed. The top one is 85mm. I just measured mine with a caliper and it was 84.99mm (10 Psi).






ITOzann,

Question.
1. What MAF are you running? I though I recall you getting a PMAS.
2. What injector size? I think I saw someplace 600cc.

I just don't understand how your only seeing 6 psi unless you have a leak some place.
I know Marbles kit was a stage 4. I almost bought it myself.

 

closer look before i shipped the kit:


Just shootin out some ideas.......Belt could be slipping.... I know you had to buy one maybe its to big so even with tensioner tightened all the way its still loose