Vortech pipe couplers ???
03-22-2010, 11:47 PM
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: Scotland
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Vortech pipe couplers ???
Hi guys, just looking to find out if anywhere does different coloured pipe couplers for the vortech supercharger, the blue ones wouldnt really suit my engine 
thanks Paul
thanks Paul
03-23-2010, 01:15 AM
#2
Registered User
iTrader: (2)
Join Date: May 2009
Location: england
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
This is what you need paul....This one here was made for a vortech with throttle body spacer. The guy who had it had it fabricated for him....Iv'e been trying to get hold of one
03-23-2010, 04:13 AM
#3
Registered User
iTrader: (8)
Join Date: Sep 2002
Location: Charlottesville, Virginia
Posts: 5,753
Likes: 0
Received 4 Likes
on
4 Posts
Check here for the hose couplers in red, black and blue.
http://www.turbohoses.com/350z.htm
LMK if you find someone who make that pipe, I could use one.
http://www.turbohoses.com/350z.htm
LMK if you find someone who make that pipe, I could use one.
03-23-2010, 08:54 AM
#6
that was my old intake tube, and yes, any decent pipe bender can make one for you. just check with your local shops.
as for couplers, i bought most of mine from hosetechniques.com - nice folks over there and they ship quickly. i also bought an odd angle coupler from turbohoses.com - good quality, but expensive.
as for couplers, i bought most of mine from hosetechniques.com - nice folks over there and they ship quickly. i also bought an odd angle coupler from turbohoses.com - good quality, but expensive.
03-24-2010, 02:01 PM
#7
Registered User
Thread Starter
Join Date: Mar 2007
Location: Scotland
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
+1 if anyone wants to make a batch of these
Paul
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM
