Vortech Uprev tuned by RT/Tuning
#23
Vendor - Former Vendor
iTrader: (7)
Hey Cliff, glad the car feels great and you are back up and running.
As far as the boost his boost was right on top of the boost from the other charger...
I dont really think the ART pipes made much of a difference in the power and tourque category. Also with the DE motors when you rev them to 7k with the vortechs power seems to flatten out up top, due to the fact that power and torque typically drops off so hard on the DE's that with the vortechs they just seem to flatten out. Unlike the the Rev Up motors where they continually make power all the way till 7200...
As far as the boost his boost was right on top of the boost from the other charger...
I dont really think the ART pipes made much of a difference in the power and tourque category. Also with the DE motors when you rev them to 7k with the vortechs power seems to flatten out up top, due to the fact that power and torque typically drops off so hard on the DE's that with the vortechs they just seem to flatten out. Unlike the the Rev Up motors where they continually make power all the way till 7200...
#24
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
I dont really think the ART pipes made much of a difference in the power and tourque category. Also with the DE motors when you rev them to 7k with the vortechs power seems to flatten out up top, due to the fact that power and torque typically drops off so hard on the DE's that with the vortechs they just seem to flatten out. Unlike the the Rev Up motors where they continually make power all the way till 7200...
The harsh drop right together just looked strange. I guess not though.
#25
Registered User
iTrader: (4)
Join Date: Apr 2009
Location: Puerto Rico
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
I dunno, it just looks so abrupt.
This my dyno on a stock engine. It starts to run out of breath on top but it's not as abrupt as the OP's.
Plus, if you compare both our dyno's....his was clearly on the verge of overpowering mine by a good amount ( he has about 20whp more than I do by 6K rpm ) yet after 6K he only has 5whp more than me. Heck, at 4500rpm he's got about 50wtrq more than I do....ouch.
This my dyno on a stock engine. It starts to run out of breath on top but it's not as abrupt as the OP's.
Plus, if you compare both our dyno's....his was clearly on the verge of overpowering mine by a good amount ( he has about 20whp more than I do by 6K rpm ) yet after 6K he only has 5whp more than me. Heck, at 4500rpm he's got about 50wtrq more than I do....ouch.
Last edited by GT-ER; 08-09-2010 at 04:07 PM.
#27
Registered User
iTrader: (3)
And the 2nd graph that that has the sharp drop after 6k is after his blower was rebuilt..
Last edited by jonnylaw; 08-09-2010 at 06:09 PM.
#28
Vendor - Former Vendor
iTrader: (7)
yea....maybe the belt did slip a lil bit that last run now that i look at it....his numbers were close and everything looked good so we didnt do any tuning the second time around we just wanted to make sure everything looked good. Cliff wants to do the GTM mod and maybe a 2.87...
cliff will be back and we will get him all hooked up next time he rolls through!!!
cliff will be back and we will get him all hooked up next time he rolls through!!!
#31
New Member
Thread Starter
iTrader: (12)
Join Date: Aug 2003
Location: Bronx N.Y/North N.J
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Using vortech's website i get impeller speed of 57860.63 and the sc is rated to 53000rpm thanks for the encouragement though. I just lost some faith in the blower it self because I had a bad one. I wont send it back to vortech if this one goes there just to slow 928 motorsports would get a call.
#32
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
i had 2.87 pulley and spun the engine to 8k. Blower sounds smooth as silk with no issues.
You have to realize, you aren't running the engine hours on end at the rpms over what they call max. If you do 1 pull straight to redline your impeller will see rpms above recommended for less than a 1/10th of a second.
and remember, their ratings are always on the safe side so they don't have to worry about warrantying anything. Most things have a "max safe" set a good deal below what it can do.
You have to realize, you aren't running the engine hours on end at the rpms over what they call max. If you do 1 pull straight to redline your impeller will see rpms above recommended for less than a 1/10th of a second.
and remember, their ratings are always on the safe side so they don't have to worry about warrantying anything. Most things have a "max safe" set a good deal below what it can do.
#33
New Member
Thread Starter
iTrader: (12)
Join Date: Aug 2003
Location: Bronx N.Y/North N.J
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
I figured that Im a very aggressive driver when I go out and play it would be more than 1 pull. I see 10 psi now at 7ki when I shift and I wouldnt mind another 1-2 psi.
Im looking for a good set of rear tires to put the power down tell i buy my new set of rims. I was all over the place at the track on sunday the best I could do was 12.7 at 114
with a 2.0 60.
Im looking for a good set of rear tires to put the power down tell i buy my new set of rims. I was all over the place at the track on sunday the best I could do was 12.7 at 114
with a 2.0 60.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM