You need to fly Hal from Dynosty over to tune it!!

Dude has mad skills

Good luck with completion!

 

i want that table

 

thanks for the clarification!

also, i didn't realize the mishimoto slim fan was such a PITA to run!? i'm glad they specifiy this additinoal info when selling this product to G/Z owners.


Zquicksilver

 

looks like an awesome build! Subscribed!

 

Little Update.

I installed the APS Extreame rail incl. The 880 injectors..

First the brackets.


Tacking out the injectors and putting some grease on it to install it.


Fitting the injectors in the rail.


Pushing the rail in place.






And now the exhaust for the turbo.




Adding the turbo's




The upgraded oilfeed lines from GTM






Next the oil return piping.

keep You Updated..

 

^looking real good

 

What is that set up at the back of the fuel rail...the rear fitting look to bolt up to 2 cylinders with a hose connecting them...

Where is the fuel inlet port to the rail(s)?

 

The inlet is in the front. Return line in the back.

 

Update

Done the Tail Wasedgates... and the Oil Return lines.

 

I had to take the top part off again. Who can see wy

 

too bad greddy doesn't offer gold colors... lol!

all most too beautiful to run it!


Zquisilver

 

Fuel rails look backwards

 

Almost The intake was backwards. Better that I saw it now.

 

bump for updates

 

No updates yet.. I had some health issues, nothing serious but a delay for a month.

starting on the wiring harness from the front of the engine to the back this week..

 

Hope it's clear sailing ahead for both your health and your build. Awesome job! Very, very impressive. Also great for the community to really look close at your photos and help out. Good eye cass!

 

The moded cooling pipes are now ready to put on the vq

 

So the wires are going te the Back to clean the engine room.









I received the haltech WB sensors. But where to put them in te exhaust?

Between the cats and turbo exit. This because the manual says 12 inch after turbo exit.

 

Love the color accents and the table. lol

only thing I'd do different would be a wastegate relocation kit. Gonna be a pain to get to them if you ever need to.

 

Hi, who can awnser my question.

Have 2 pair O2 sensors out of 2 exhaust headers. Who can tell me the diference? in function... year used..