1. Haltech Platinum Pro
2. Haltech Dual Wideband Controller with 2 sensors
3. Dual Wideband Gauge
4. Boost Control Solenoid Kit
5. Billet Mounting Bracket

I recently purchased the listed items above from a reputable vendor on here. However, my builder tells me he is unable to hard-wire my setup unless he has the wiring diagram. This is the last piece of the puzzle and is so frustrating! Can anyone please help me? Thank you in advance.

 

You either buy the Haltech HR patched harness from IP for around $700 or send them your harness to patch.

Or do it the hard way and hard-wire it, and to do that you need to PM Hal for wiring diagram https://my350z.com/forum/private.php?do=newpm&u=80890.

 

Couple weeks ago when I spoke to Hal over the phone, he informed me that the Haltech HR patched harness will take about 3 weeks for me to get because they are made to order...
I sent a PM to Hal if he can provide me with the wiring diagram so hopefully he can help me out. Does anyone else happen to have the wiring diagram? Any input would be greatly appreciated.

 

wiring diagram is carefully guarded secret apparently. i've been trying to find out what analog voltages go with which sensor. Easy to find out with a diagram, but no one will provide that info.

Hopefully you have a luck, and if you do, please post it online

 

Why did you say that

Now no one will give it to him

 

haltech has wiring diagrams for their other models. dunno why the PnP harnesses are treated different.

 

So far I have no luck and it isn't looking good Builder says he can't install it unless I can get him the wiring diagram. Haltech said contact Injected Performance for possible assistance... Injected Performance gave me Hal's direct number to his office but I had no luck getting a hold of him. I also spoke to Eugene from SP Engineering since they actually tuned Greddy's demo HR 350Z with Haltech. He said he will try to find the Haltech HR patch loom and call me back... Someone please help if you know of a solution!

 

Update: Ok so I am ordering the HR adaptor harness for Haltech from Hal and he said he will have one ready to ship out by the end of next week. At times like this, I just wish I had gotten a used DE... HR is like the middle child that never got much love...

 

I have the diagram, but I'm sworn to secrecy

 

 

 

joe what turbo kit you putting on

 

Greddy HR 20G TT kit. Are you going turbo also?

 

gtm twin turbo with haltech

 

Cool good luck with your build.

 

thnx u2

 

any luck on the diagram? I'd want it to see if it's possible to wire in my exhaust cam timing on my 06 engine instead of getting and installing a new harness.

 

get the service manual here
http://xenonz33.com/reference.html

it has all the wiring pins in the EC page

 

cheers, trying to dezifer where the plugs go into the ecm, think I got it right. Better pass that onto better knowledgable people