Hey,
I just started looking into nitrous, and I know with a wet kit you tap into the z-tube in between the MAF sensor and the TB. Obviously it's pretty easy because its plastic, but how do you do this if you have an Injen intake? I don't see how you'd tap into the intake tube if its metal. Is this what you'd use a TB spacer for and tap into that?

Just a question out of curiosity. Thanks to anyone who can clear this up for me

 

I would suggest taping into the gas tank and injecting nitrous into your fuel it would be like having direct injection nitrous.

 

buy my kit i might include a pre tapped intake for you!

 

buy a Female Aluminum NPT Weld Boss
http://www.anplumbing.com/shop/index...dept=Weld!_Ons

and get it welded on. The intake tube would only get 1 or 2 threads if you just drilled and tapped that.

 

^this is your best and safest bet.

 

Thanks for the replies

 

I have the Injen CAI. RT Tuning welded a bung onto the intake.

 

just tap it into you fuel supply line. at least you'll have the nitrous evenly dispersed to your cylinders. check this adapter out by z1.

http://www.z1motorsports.com/350_g35...oducts_id=3044