Tuning my car and running into fuel issue
Hey Dan, figure it would be easier for me to clarify. It was actually the Exhaust Cam timing control connectors were swapped bank to bank. So the Exhaust cam sensors were reading correctly but when they were trying to make actual adjustments to the exhaust cam timing itself, it would be reading the wrong bank. So when it would command more timing and nothing happened it would keep trying to get more, and likewise to the other side when it saw advance that is wasn't looking to see it would start pulling the timing out causing about a 40 degree difference in Cam timing advance from one bank to another.
Once that was fixed everything looked great but the clutch
...so we will get that twin disc in and he will be good to finish the tune... 
Once that was fixed everything looked great but the clutch
...so we will get that twin disc in and he will be good to finish the tune...
You know thru out this past 2 years it has been a lot of ups and downs. I never really got the chance to enjoy this car. I have learned a lot. I would like to keep learning about my car mainly cause it's not going anywhere. I will be keeping it so far. I have a lot of other things I need to worry about other then a car.
Anyway Thanks to Vince for taking care of the issue. I had a trust issue with shops mainly cause I just don't trust anyone. I had done biz in the past w/Vince and went to other shops after because of my issue I have with people. I guess this is a new start w/ a new relationship w/ Vince at RT Tuning. He has been upfront, good with prices and so far I'm happy!!!!!!! I just hope at the end eveything is still ok and I can finally enjoy my car!!!!!!
My whole build thread is on g35driver, You can check it out from the night the motor blew till now. I did the best I could in explaining and pics. I'm just a busy person w/ running my biz... Check it out!!
Anyway Thanks to Vince for taking care of the issue. I had a trust issue with shops mainly cause I just don't trust anyone. I had done biz in the past w/Vince and went to other shops after because of my issue I have with people. I guess this is a new start w/ a new relationship w/ Vince at RT Tuning. He has been upfront, good with prices and so far I'm happy!!!!!!! I just hope at the end eveything is still ok and I can finally enjoy my car!!!!!!
My whole build thread is on g35driver, You can check it out from the night the motor blew till now. I did the best I could in explaining and pics. I'm just a busy person w/ running my biz... Check it out!!
Last edited by 856_reilly; Sep 21, 2011 at 09:36 AM.
glad to hear your problem was found and fixed, now onto the clutch and after hopefully you finely get to really enjoy the car, i'm in the same boat waiting to finally enjoy my car after 8 months of not really driving it since i went turbo lol. good luck
Thanks brotha!!!!!! I was gonna hit you up matter of fact. I'm thinking of new wheels, DPE and kinda want your opinion on offsets. Been awhile since I had to do it and I'm stuck. I pretty much am set up how you use to be. I'll PM you.... Thanks again!!!
Also I am coming up on 2 years with out my car. I hope that it is coming to an end. I just want to go beat on my car...
http://g35driver.com/forums/forced-i...full-build.htm
Try that. That should get you there pal....
Try that. That should get you there pal....
Thread
Thread Starter
Forum
Replies
Last Post
