AWD 380Z TT Completed
#22
Cool did a shop do it in North America or was it in AUS? I am in for pictures/details was it sedan parts with a different tranny or R-32/R-34 parts i assume a combo of sedan axles diff ect with GTR trans.
I have been thinking about an AWD conversion lately.....
I have been thinking about an AWD conversion lately.....
Last edited by Sylvan Lake V35; 11-18-2011 at 03:17 PM.
#23
^^ I spent a hour or two staring at pics of RB transmissions and I came to the conclusion that I didn't want to buy one because I wasn't very confident I could mate it to a VQ properly. I think I was most worried about the starter. IIRC the RB bell housings are not removeble either?
I'll say that I have been highly interested in this for a while and of anyone knows of a somewhat cost effective manual trans to do it.... Well it excites me enough that I would say I have a spare DE block in my garage at home and if someone shipped me a trans to borrow for R&D, I would build them an adapter plate or bell housing for letting me use it. Not sure if I could help with the clutch/flywheel combo or not though.
I'll say that I have been highly interested in this for a while and of anyone knows of a somewhat cost effective manual trans to do it.... Well it excites me enough that I would say I have a spare DE block in my garage at home and if someone shipped me a trans to borrow for R&D, I would build them an adapter plate or bell housing for letting me use it. Not sure if I could help with the clutch/flywheel combo or not though.
#25
Driven1 would know the car and the story behind it best. Also try searching the user name Juan@FunctionTuned
#27
http://media.photobucket.com/image/u...tro/64_G35.jpg
Break out some glasses and take a read!
#28
It was a manual,
http://media.photobucket.com/image/u...tro/64_G35.jpg
Break out some glasses and take a read!
http://media.photobucket.com/image/u...tro/64_G35.jpg
Break out some glasses and take a read!
#31
#35
#37